Download Print this page
   

Advertisement

Epson PowerLite 85/825/826W

Cleaning the Air Filter and Vent

Your projector includes an air ter to ensure the best performance. If
dust collects on th
Dust clogs prevent proper ventilation and can cause overheating and
damage the projector.
If you see the following message, clean the air ter immediately.
The projector is overheating. Make sure nothing is blocking the
air vent, and clean or replace the air filter.
1. Turn
the projector. Wait for the P power light to stop
then unplug the power cord.
2. To clean the intake vent and
designed for computers and other
have one, gently clean the vent with a soft brush (such as an
artist's paintbrush).
You can remove the air lter to clean both sides. For instructions,
see page 110.
The exhaust
vent is on the
other side of
the projector
3. If the dirt is di
ult to remove or the
message appears again after cleaning, replace the lter as described
on page 110. Contact your dealer or call Epson at
800-GO-EPSON (800-463-7766) to purchase
or vent, clean them as described below.
use a small vacuum cleaner
e equipment. If you don't
is damaged, or if the
INSTALLATION HANDBOOK
note
To order replacement air
lters, request part number
V13H134A22. See page 13
for ordering information.
Maintenance
1

Advertisement

   Related Manuals for Epson PowerLite 85

   Summary of Contents for Epson PowerLite 85

  • Page 1: Cleaning The Air Filter And Vent

    3. If the dirt is di ult to remove or the is damaged, or if the message appears again after cleaning, replace the lter as described on page 110. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to purchase...

  • Page 2: Replacing The Air Filter

    If the lter is di cult to clean or damaged, or if the overheating message appears after cleaning, you need to replace the lter. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to obtain a new lter. 1. Turn o the projector.

  • Page 3

    INSTALLATION HANDBOOK Epson PowerLite 85/825/826W Maintenance 4. Grasp the tab and pull the lter straight out. 5. Press in the new air lter until it clicks in place. 6. Close the air lter cover.

This manual also for:

Powerlite 825, Powerlite 826w

Comments to this Manuals

Symbols: 0
Latest comments: