Solving Problems With The Image Or Sound - Epson PowerLite 825 User Manual

Solving Problems
120
You hear the projector's fan after the power has been turned
off.
If is set to
Standby Mode
operate after the projector has cooled down. See page 101 for more
information about this setting.
Solving Problems with the Image
or Sound
No image appears on the screen.
Check that the Ppower light is green, not flashing.
■
■ The projector may be in standby or sleep mode. If the Ppower
light is orange, press the Ppower button to turn the projector on.
■ If the power was switched off and then on again, the projector
may be cooling down. Wait until the Ppower light stops flashing
and remains orange; then press the Ppower button again.
Press the
■
A/V Mute
the picture has not been turned off temporarily.
Open the A/V Mute slide, if it is closed.
■
The attached computer may be in sleep mode or displaying a
■
black screen saver. Try pressing a key on the computer.
If you are projecting from a DVD player or other video source,
■
make sure you turn it on and press its
If you're projecting through your computer's USB port, make
■
sure the
USB Type B
(see page 101). The USB display feature is not available
Display
for Windows 98, Windows Me, or Macintosh.
You may need to install the USB display drivers manually by
clicking
My Computer
.
Empudse.exe
Communication On
button on the remote control to make sure
Play
setting in the Extended menu is set to
, then
EPSON_PJ_UD
, the fans continue to
button.
USB
, then