Table of Contents
Advertisement
2.3.
Power and I/O Connectors
Connect the Power Supply
Plug the ATX connector of the power supply into CN1 and plug the
ATX 12V 4-pin connector of the power supply into CN5.
Plug the AC power cord into the power supply.
Connect the Keyboard, Mouse and External GPU Card
Plug keyboard, mouse and display cable (if using an external GPU
card, not included) into the Express-BASE7.
Console mode output also supported (Type 7 modules do not
support graphics output).
8
Required Items
DO NOT plug the ATX 12V 4-pin connector into the
ATX 24-pin power connector.
Required Items
None
Getting Started
Advertisement
Table of Contents
Need help?
Do you have a question about the COM Express Type 7 Starter Kit Plus and is the answer not in the manual?