2.2.
Board Installation
Procedure
Step 1
Insert SO-DIMM memory into the COM Express Type 7 module's
SO-DIMM socket.
Step 2
Removed all protective membranes from the thermal pads.
Step 3
Assemble the thermal solution onto the COM Express Type 7
module.
Step 4
Use the M2.5, L=6mm screws provided to fasten the thermal
solution to the COM Express Type 7 module.
6
Required Items
Getting Started
Need help?
Do you have a question about the COM Express Type 7 Starter Kit Plus and is the answer not in the manual?