Table of Contents
Advertisement
Type 7 Starter Kit Plus
Procedure
Required Items
Step 5
Place the COM Express Type 7 module and thermal solution
assembly onto the connectors on the carrier board as shown.
Step 6
Use the M2.5, L=16mm screws provided to secure the COM
Express Type 7 module to the carrier board from the solder side.
None
Step 7
If you are installing a heatsink with fan, plug the fan connector
into the carrier board as shown.
Getting Started
7
Advertisement
Table of Contents
Need help?
Do you have a question about the COM Express Type 7 Starter Kit Plus and is the answer not in the manual?