Image Parameters Switch; Video Standard; Local Video Output; Osd - HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM User Manual

Network Camera User Manual
show the image normally. Select the mirror mode as needed.
NOTE: The video recording will be shortly interrupted when the function is enabled.
4.6.3

Image Parameters Switch

The device automatically switches image parameters in set time periods.
Go to the image parameters switch setting page: Configuration → Image → Image Parameters Switch, and
set parameters as needed.
Set Scheduled-Switch
Switch the image to the linked scene mode automatically in certain time periods.
Steps
1. Check Scheduled-Switch.
2. Select and configure the corresponding time period and linked scene mode.
NOTE: For Linked Scene configuration, refer to
3. Click Save.
4.6.4

Video Standard

Video standard is an ability of a video card or video display device to define the number of colors that are
shown and the resolution. The two most common video standard used are NTSC and PAL. In NTSC, 30
frames are transmitted each second. Each frame is made up of 525 individual scan lines. In PAL, 25 frames
are transmitted each second. Each frame is made up of 625 individual scan lines. Select video signal
standard according to the video system in your country.
4.6.5

Local Video Output

If the device is equipped with video output interfaces such as BNC, CVBS, HDMI, and SDI, you can preview
the live image directly by connecting the device to a monitor screen.
Set the output mode to ON/OFF to control the output.

4.7 OSD

You can customize OSD (On-Screen Display) information such as device name, time/date, font, color, and
text overlay displayed on video stream.
Go to OSD setting page: Configuration → Image → OSD Settings. Set the corresponding parameters, and
click Save to take effect.
• Character Set
Select character set for displayed information. If Korean is required to be displayed on screen, select
EUC-KR. Otherwise, select GBK.
UM Network Camera User Manual 071421NA
Scene Mode
.
31