Set Waiting Time Detection - HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM User Manual

Network Camera User Manual
Before You Start
To enable the function, go to VCA Resource, and select Queue Management.
Steps
1. Go to Configuration → Queue Management.
2. Select Regional People Queuing-Up.
3. Click Add Region to draw the detection area and set Region Name and Alarm Interval. Repeat this step
above to set more areas.
•
Alarm Interval: During the set alarm interval, alarms of the same type only trigger one notification.
4. Optional: Check OSD to display the region name and its real-time queuing-up people number.
5. Set Alarm threshold. An alarm is triggered when the alarm threshold condition is met.
6. For arming schedule settings, refer to
Linkage Method Settings
7. Click Save.

10.5.2 Set Waiting Time Detection

Counts the waiting time of each person that enters the detection area. Alarms are triggered when the
alarm threshold condition and the alarm trigger are both met.
Before You Start
To enable the function, go to VCA Resource, and select Queue Management.
Steps
1. Go to Configuration → Queue Management.
2. Select Waiting Time Detection.
UM Network Camera User Manual 071421NA
Figure 12, Set Regional People Queuing-Up
Set Arming Schedule
.
. For linkage method settings, refer to
98