Operation; Pull Chain Operating Instructions; Reverse Switch Operating Instructions - HAMPTON BAY SEAPORT AL634-WH Use And Care Manual

Operation

PULL CHAIN OPERATING INSTRUCTIONS

PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (MM) onto the pull chains located in the
light kit (J). Turn on the power and check the operation of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
Light kit pull chain- it controls the light kit in "ON" or "OFF".

REVERSE SWITCH OPERATING INSTRUCTIONS

REVERSE SWITCH OPERATING INSTRUCTIONS
The reverse switch is located on the surface of the light kit. Slide the
switch to the left for warm weather operation. Slide the switch to the right
for cool weather operation.
NOTE: Wait for fan to stop before reversing the direction of
the blade rotation.
Warm weather - (Counterclockwise Direction) A downward air flow creates
a cooling effect. This allows you to set your air conditioner on a higher
setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves warm air
off the ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
J
MM
16