Operation; Pull Chain Operating Instructions; Reverse Switch Operating Instructions - HAMPTON BAY LELAND II Use And Care Manual

Operation

PULL CHAIN OPERATING INSTRUCTIONS

PULL CHAIN OPERATING INSTRUCTIONS
Attach the two pull chains and fobs (NN) to the pull chains located in the
switch housing and light kit (J). Turn on the power and check the
operation of the fan.
The fan pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
To turn the light kit (J) on or off, pull the chain that is attached to the
light kit (J).

REVERSE SWITCH OPERATING INSTRUCTIONS

REVERSE SWITCH OPERATING INSTRUCTIONS
The reverse switch is located on the surface of the switch housing.
Slide the switch to the left for warm weather operation. Slide the
switch to the right for cool weather operation.
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
Warm weather - (Counterclockwise Direction) A downward air flow
creates a cooling effect. This allows you to set your air conditioner
on a warmer setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit on
a cooler setting without affecting your comfort.
NN
15
Please contact 1-877-527-0313 for further assistance.
J
HAMPTONBAY.COM