Table of Contents
Advertisement
Safety Information
1.
To reduce the risk of electric shock, insure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
2.
All wiring must be in accordance with the National Electrical
Code "ANSI/NFPA 70-1999" and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
3.
The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35
pounds, Use only UL Listed outlet boxes marked "FOR FAN
SUPPORT."
4.
The fan must be mounted with a minimum of 7 feet clearance
from the trailing edge of the blades to the floor.
5.
Avoid placing objects in path of the blades.
6.
To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
7.
Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
8.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into outlet
box. The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on the other
side of the outlet box.
9.
All set screws must be checked and retightened where
necessary before installation.
WARNING:
Use only with light kit marked "Suitable for Use
in Wet Locations".
WARNING:
To reduce the risk of electrical shock or fire, do
not use this fan with any solid-state fan speed control device.
It will permanently damage the electronic circuitry.
CAUTION:
To reduce the risk of personal injury, use only
the screws provided with the outlet box.
WARNING:
To reduce the risk of personall injury, do not
bend the blade arms (also referred to as flanges), when
installing the brackets, balancing the blades or cleaning the
fan. Do not insert foreign objects in-between rotating fan
blades.
WARNING:
To reduce the risk of fire, electric shock or
personal injury, mount fan to outlet box marked acceptable
for fan support with the screws provided with the outlet box.
ATTENTION:
the department of energy 2009 regulation. Lamping this
product over 190W will cause this fan to not light. Please use
bulbs with a total wattage under the 190W regulation.
3
Please contact 1-877-527-0313 for further assistance.
fan includes a 190W limiter to comply with
HAMPTONBAY.COM
Advertisement
Table of Contents
