Hanging The Fan - HAMPTON BAY SEAPORT AL634-WH Use And Care Manual

Assembly — Hanging the Fan
Installing the mounting bracket to
4
the electrical box
WARNING: To reduce the risk of fire, electric shock or
other personal injury. Mount fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□
Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□
Install the mounting bracket (A) to the outlet box with
the screws and washers provided with your outlet
box.
□
Security tighten the two mounting screws.
Hanging the fan to the
5
mounting bracket
□
Carefully lift the fan motor assembly (F) up to the
mounting bracket (A) and seat the hanger ball (D) in
the mounting bracket socket. Make sure the tab on
the mounting bracket socket is properly seated in the
groove in the hanger ball (D). This will help to balance
the ceiling fan.
WARNING: The tab in the ring must rest in the groove of
the hanger ball (D). Failure to properly seat the tab in the
groove could cause damage to wiring.
A
D
F
10
A