Table of Contents
Advertisement
Assembly — Attaching the Fan Blades
Attaching the blades to the
9
blade arms
□
Attach blades (G) to blade arms (H) using the 3
screws with rubber washers provided with the blade
attachment hardware (AA). Start a screw with rubber
washer (AA) into the blade arm (H), do not tighten.
Repeat for the 2 remaining screws and rubber
washers (AA).
□
Tighten each screw securely starting with the center
screw. Make sure the blade (G) is straight. Repeat
steps for the remaining blades.
G
AA
H
Fastening the blade
10
assemblies to the motor
□
Fasten the blade assemblies to the fan motor
assembly (F) by lining up the slots of the blade arms
(H) with the tabs on the motor, then tighten the two
screws and lock washers (II) already installed in the
blade arms (H).
□
Repeat procedure with remaining blade arms (H).
WARNING:
To reduce the risk of personal injury, do not
bend the blade arms(H) while installing, balancing the
blades(G), or cleaning the fan. Do no insert foreign objects
between rotating fan blades(G).
13
Please contact 1-877-527-0313 for further assistance.
F
H
II
G
HAMPTONBAY.COM
Advertisement
Table of Contents
