HAMPTON BAY SEAPORT AL634-WH Use And Care Manual page 12

Assembly — Hanging the Fan (continued)
7
Installing the canopy
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (D) before
attaching the canopy (B) to the mounting bracket (A) by
turning the canopy housing until it drops into place.
□
Tuck connections neatly into ceiling outlet box.
□
Slide the canopy (B) up to mounting bracket (A) and
place the key hole on the canopy (B) over the loose
canopy mounting screw (EE) on the mounting bracket
(A), turn canopy (B) clockwise until the canopy (B)
locks in place at the narrow section of the key holes.
□
Align the circular hole on the canopy (B) with the
remaining hole on the mounting bracket (A), secure
the canopy mounting screw (EE) previously removed
in the hole and tighten the 2 canopy mounting screws
(EE).
A
EE
8
□
B
EE
12
Attaching the canopy bottom
cover
Attach the canopy bottom cover (C) to the canopy
mounting screw heads by inserting the screw heads
into the key slots in the canopy bottom cover (C) and
rotating the canopy bottom cover (C) clockwise.
NOTE: Adjust the canopy mounting screws (EE) as
necessary until the canopy (B) and canopy bottom cover (C)
are snug.
B
EE
C