Matrix G7 Strenght Service Manual
  1. Manuals
  2. Brands
  3. Matrix Manuals
  4. Fitness Equipment
  5. G7 Strenght
  6. Service manual

Matrix G7 Strenght Service Manual

Hide thumbs Also See for G7 Strenght:
Table of Contents

Advertisement

Quick Links

G 7 S t r e n G t h
S e r V I C e M A n U A l

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G7 Strenght and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Matrix G7 Strenght

Summary of Contents for Matrix G7 Strenght

  • Page 1 G 7 S t r e n G t h S e r V I C e M A n U A l...

  • Page 3: Table Of Contents

    tAble of ContentS ChAPter 1: SerIAl nUMber loCAtIon ............1 ChAPter 2: IMPortAnt SAfety InStrUCtIonS Important Safety Information ..................2 Check for Damaged Parts ................... 2 ChAPter 3: PreVentAtIVe MAIntenAnCe Preventative Maintenance Checklist ................3 Repetition Counter Info ....................4 ChAPter 4: ProDUCt SPeCIfICAtIon &...
  • Page 4 tAble of ContentS 5.17 G7-S74 Hip Adductor Assembly Instructions .............. 126 5.18 G7-S75 Hip Abductor Assembly Instructions .............. 135 5.19 G7-S78 Glute Assembly Instructions ................142 ChAPter 6: troUbleShootInG Troubleshooting - Repetition Counter Issues .............. 149 Troubleshooting - Incremental Weight Pin Issues ............151 Troubleshooting - Arms Are Uneven ................

  • Page 5: Chapter 1: Serial Number Location

    ChAPter 1: SerIAl nUMber loCAtIon 1.1 SerIAl nUMber loCAtIon the serial number is located at the bottom of the weight stack frame.

  • Page 6: Chapter 2: Important Safety Instructions

    Follow these precautions to avoid 5) Ensure that any person(s) making adjustments or performing injuries. maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training at 1) Never allow children on selectorized strength equipment.

  • Page 7: Chapter 3: Preventative Maintenance

    ChAPter 3: PreVentAtIVe MAIntenAnCe 3.1 PreVentAtIVe MAIntenAnCe CheCklISt Preventative maintenance and daily cleaning will prolong the life and look of your Matrix Fitness Systems equipment. ACtIon freQUenCy Clean Upholstery Daily Inspect Cables Daily Clean Guide Rods Monthly Inspect Hardware Monthly...

  • Page 8: Repetition Counter Info

    ChAPter 3: PreVentAtIVe MAIntenAnCe 3.2 reP CoUnter InforMAtIon reP CoUnter InforMAtIon to See the ACCUMUlAteD rePS or hoUrS: 1) Hold a strong magnet to the outside of the rep counter face plate over the clock for 5 seconds to activate Service Mode. If this is not working, a stronger magnet may be needed.

  • Page 9: G7-S12 Pec Fly

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.1 G7-S12 PeCtorAl fly teChnICAl SPeCIfICAtIonS Overall Dimensions 63"L x 47"W x 52"H Weight 592 lbs Shipping Weight 638 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 10: G7-S13 Chest Press

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.2 G7-S13 CheSt PreSS teChnICAl SPeCIfICAtIonS Overall Dimensions 63"L x 57"W x 52"H Weight 827 lbs Shipping Weight 870 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 11: G7-S21 Lateral Raise

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.3 G7-S21 lAterAl rAISe teChnICAl SPeCIfICAtIonS Overall Dimensions 51"L x 42.5"W x 52"H Weight 610 lbs Shipping Weight 689 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 12: G7-S23 Shoulder Press

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.4 G7-S23 ShoUlDer PreSS teChnICAl SPeCIfICAtIonS Overall Dimensions 63"L x 57"W x 52"H Weight 827 lbs Shipping Weight 870 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 13: G7-S33 Lat Pull Down

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.5 G7-S33 lAt PUll DoWn teChnICAl SPeCIfICAtIonS Overall Dimensions 61"L x 47"W x 77"H Weight 858 lbs Shipping Weight 914 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years...

  • Page 14: G7-S34 Seated Row

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.6 G7-S34 SeAteD roW teChnICAl SPeCIfICAtIonS Overall Dimensions 64"L x 48"W x 52"H Weight 646 lbs Shipping Weight 693 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 15: G7-S40 Arm Curl

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.7 G7-S40 ArM CUrl teChnICAl SPeCIfICAtIonS Overall Dimensions 63"L x 67"W x 52"H Weight 553 lbs Shipping Weight 602 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 16: G7-S42 Tricep Pressdown

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.8 G7-S42 trICeP PreSS teChnICAl SPeCIfICAtIonS Overall Dimensions 61"L x 42"W x 52"H Weight 675 lbs Shipping Weight 727 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 17: G7-S51 Abdominal

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.9 G7-S51 AbDoMInAl CrUnCh teChnICAl SPeCIfICAtIonS Overall Dimensions 52"L x 48"W x 52"H Weight 571 lbs Shipping Weight 630 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 18: G7-S52 Back Extension

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.10 G7-S52 bACk eXtenSIon teChnICAl SPeCIfICAtIonS Overall Dimensions 75"L x 43"W x 52"H Weight 882 lbs Shipping Weight 946 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 19: G7-S55 Rotary Torso

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.11 G7-S55 rotAry torSo teChnICAl SPeCIfICAtIonS Overall Dimensions 45.3"L x 45"W x 54.7"H Weight 536 lbs Shipping Weight 569 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 20: G7-S57 Calf Extension

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.12 G7-S57 CAlf eXtenSIon teChnICAl SPeCIfICAtIonS Overall Dimensions 59"L x 45"W x 57"H Weight 575 lbs Shipping Weight 617 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 21: G7-S70 Leg Press

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.13 G7-S70 leG PreSS teChnICAl SPeCIfICAtIonS Overall Dimensions 75"L x 43"W x 52"H Weight 882 lbs Shipping Weight 946 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 22: G7-S71 Leg Extension

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.14 G7-S71 leG eXtenSIon teChnICAl SPeCIfICAtIonS Overall Dimensions 48"L x 47"W x 52"H Weight 646 lbs Shipping Weight 683 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 23: G7-S72 Seated Leg Curl

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.15 G7-S72 SeAteD leG CUrl teChnICAl SPeCIfICAtIonS Overall Dimensions 55"L x 46"W x 52"H Weight 666 lbs Shipping Weight 740 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years...

  • Page 24: G7-S73 Prone Leg Curl

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.16 G7-S73 Prone leG CUrl teChnICAl SPeCIfICAtIonS Overall Dimensions 68"L x 44"W x 52"H Weight 581 lbs Shipping Weight 638 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years...

  • Page 25: G7-S74 Hip Adductor

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.17 G7-S74 hIP ADDUCtor teChnICAl SPeCIfICAtIonS Overall Dimensions 68"L x 65"W x 52"H Weight 597 lbs Shipping Weight 657 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 26: G7-S75 Hip Abductor

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.18 G7-S75 hIP AbDUCtor teChnICAl SPeCIfICAtIonS Overall Dimensions 63"L x 57"W x 52"H Weight 627 lbs Shipping Weight 670 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 27: G7-S78 Glute

    ChAPter 4: ProDUCt SPeCIfICAtIonS AnD WArrAnty InforMAtIon 4.19 G7-S78 GlUte teChnICAl SPeCIfICAtIonS Overall Dimensions 80"L x 38"W x 54"H Weight 511 lbs Shipping Weight 544 lbs WArrAnty (Valid in USA only) Frame (not coatings) 10 years Structural Parts 10 years Weight Stacks 5 years Pulleys...

  • Page 28: Chapter 5: Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Pectoral Fly is 214 lbs (97 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 378 lbs (174 kg).
  • Page 29 ChAPter 5: ASSeMbly InStrUCtIonS 5.1 G7-S12 PeCtorAl fly ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Screw (M10 x 30L) Flat Washer (M10) Lock Washer (M10) Screw (M8 x 75L) Nylon Nut (M10) Arc Flat Washer Screw (M10 x 75L) Screw (M10 x 135L) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 30 ChAPter 5: ASSeMbly InStrUCtIonS 5.1 G7-S12 PeCtorAl fly ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Lock Washer (M10) Screw (M10 x 75L) Screw (M10 x 30L) Arc Flat Washer...
  • Page 31 ChAPter 5: ASSeMbly InStrUCtIonS 5.1 G7-S12 PeCtorAl fly ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Pulley Cover Stopper Bolt Screw (M8 x 60L) Screw (M8 x 20L) C Clamp Flat Washer (M26)
  • Page 32 ChAPter 5: ASSeMbly InStrUCtIonS 5.1 G7-S12 PeCtorAl fly ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 33 ChAPter 5: ASSeMbly InStrUCtIonS 5.1 G7-S12 PeCtorAl fly ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 60L) Lift the wing and top cover, then assemble the front and rear shields to the frame.

  • Page 34: G7-S13 Chest Press Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Chest Press is 398 lbs (181 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 429 lbs (195 kg).
  • Page 35 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Nut (M10 x 1.5P) Fix Washer (M10) Lock Washer (M10) Screw (M8 x 60L) Screw (M10 x 75L) Screw (M10 x 12L) Washer;Arc Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 36 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Nut (M10 x 1.5P) Fix Washer (M10) Small Pulley Cover Large Pulley Cover Stopper Plate Screw (M6 x 45L) Flat Washer (M10) Fixing Block Fixing Pin Screw (M10 x 105L) Clip;Inner C...
  • Page 37 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Pulley Cover Screw (M8 x 25L) Connecting Rod Spring; Swirl...
  • Page 38 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Base Fixing Cover Fixing Axle Clip;External;C Type Clip;Internal;C Type Wave Washer Cable Steel Clamp Screw (M10 x 15L) Screw (M6 x 10L) Screw (M6 x 60L) Flat Washer (M6) Nut Cap Settle Screw...
  • Page 39 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 60L)
  • Page 40 ChAPter 5: ASSeMbly InStrUCtIonS 5.2 G7-S13 CheSt PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Screw (M10 x 75L) Screw (M10 x 15L)

  • Page 41: G7-S21 Lateral Raise Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Lateral Raise is 411 lbs (186 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 199 lbs (90 kg).
  • Page 42 ChAPter 5: ASSeMbly InStrUCtIonS 5.3 G7-S21 lAterAl rAISe ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Lift the aluminum wing and top cover, then take apart the front and rear shields. Q11 bolts will not be used anymore for the wing and cover re-assembly. Item Description Quantity...
  • Page 43 ChAPter 5: ASSeMbly InStrUCtIonS 5.3 G7-S21 lAterAl rAISe ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Flat Washer (M8) Small Pulley Cover Fixing Plate Cable Stopper C Ring Wave Spring Screw (M10 x 20L)
  • Page 44 ChAPter 5: ASSeMbly InStrUCtIonS 5.3 G7-S21 lAterAl rAISe ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Small Pulley Cover Screw (M10 x 25L) Connecting Rod Swirl Spring Shaft...
  • Page 45 ChAPter 5: ASSeMbly InStrUCtIonS 5.3 G7-S21 lAterAl rAISe ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Screw; Hex Socket Screw (M10 x 20L) Screw (M8 x 20L) Screw (M10 x 20L)
  • Page 46 ChAPter 5: ASSeMbly InStrUCtIonS 5.3 G7-S21 lAterAl rAISe ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Lift the wing and top cover, then assemble the front and rear shields to the frame.

  • Page 47: G7-S23 Shoulder Press Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Shoulder Press is 398 lbs (181 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 429 lbs (195 kg).
  • Page 48 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M10 x 75L) Screw (M10 x 30L) Spring Washer (M10) Flat Arc Washer Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 49 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Shaft Pulley Cover Flat Washer Screw (M10 x 55L) Bearing Cover Screw (M10 x 15L) Wave Washer C Clip Screw (M8 x 20L) Screw (M6 x 12L)
  • Page 50 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Pulley Cover Screw (M8 x 25L) Connecting Rod Swirl Spring Shaft...
  • Page 51 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Pulley Cover Fixing Pin Screw (M6 x 45L) Stopper Plate Fixing Block Screw (M10 x 105L) C Clip Flat Washer (M8)
  • Page 52 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 53 ChAPter 5: ASSeMbly InStrUCtIonS 5.4 G7-S23 ShoUlDer PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Right Front Cover Rear Cover Left Front Cover Screw (M8 x 60L) Lift the wing and top cover, then assemble the front and rear shields to the frame.

  • Page 54: G7-S33 Lat Pull Down Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Lat Pull Down is 439 lbs (199 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 429 lbs (195 kg).
  • Page 55 ChAPter 5: ASSeMbly InStrUCtIonS 5.5 G7-S33 lAt PUll DoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Nut (M10) Flat Washer (M10) Lock Washer (M10) Screw (M10 x 30L) Screw (M10 x 75L) Screw (M10 x 55L) Arc Flat Washer Screw (M10 x 30L) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 56 ChAPter 5: ASSeMbly InStrUCtIonS 5.5 G7-S33 lAt PUll DoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Nut (M10) Cover Shaft Cover Flat Washer (M10) Screw (M10 x 15L) Clip;External C Type Washer (26 x 35 x .3T) 2 Screw (M6 x 12L) Screw (M8 x 15L) Screw (M10 x 105L)
  • Page 57 ChAPter 5: ASSeMbly InStrUCtIonS 5.5 G7-S33 lAt PUll DoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Nut (M10) Cover Flat Washer (M10) Stopper Plate Screw (M6 x 45L) Fixing Block Clip;Internal;C Type Fixing Pin Screw (M10 x 110L) Flat Washer (M8)
  • Page 58 ChAPter 5: ASSeMbly InStrUCtIonS 5.5 G7-S33 lAt PUll DoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Shaft Screw (M10 x 20L) Screw (M8 x 25L) Flat Washer (M8)
  • Page 59 ChAPter 5: ASSeMbly InStrUCtIonS 5.5 G7-S33 lAt PUll DoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Lift the wing and top cover, then assemble the Right Front Shield front and rear shields to the frame. Rear Shield Left Front Shield Screw (M8 x 60L)

  • Page 60: G7-S34 Seated Row Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Seated Row is 350 lbs (159 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 296 lbs (135 kg).
  • Page 61 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nut (M10) Screw (M10 x 30L) Screw (M10 x 75L) Arc Flat Washer Lock Washer (M10) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 62 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Screw (M10 x 20L) C Clip Wavy Washer Axle Arm Nut (M10) Screw (M10 x 20L)
  • Page 63 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Pulley Screw (M10 x 50L) Flat Washer (M10) Pulley Cover Stop Plate; Cam Screw;Lock Fixing Block Cable Screw (M10 x 105L) Nut (M10)
  • Page 64 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Bearing Cover Fixing Pin Screw (M10 x 105L) Nut (M10) Flat Washer (M10) Screw (M6 x 12L) C Clamp Flat Washer (M8)
  • Page 65 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 25L) Grip Cover Sleeve Ring Connecting Rod Cover Nut (M6) Flat Washer (M6) Swirl Spring Air Shock...
  • Page 66 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Right Front Shield Rear Shield Left Front Shield Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.
  • Page 67 ChAPter 5: ASSeMbly InStrUCtIonS 5.6 G7-S34 SeAteD roW ASSeMbly InStrUCtIonS - ContInUeD SteP 7 Item Description Quantity Seat Pad Chest Pad Cover Chest Pad Screw (M10 x 25L) Screw (M10 x 25L)

  • Page 68: G7-S40 Arm Curl Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Arm Curl is 353 lbs (160 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 200 lbs (91 kg).
  • Page 69 ChAPter 5: ASSeMbly InStrUCtIonS 5.7 G7-S40 ArM CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nut (M10) Screw (M10 x 30L) Lock Washer (M10) Screw (M10 x 90L) Screw (M10 x 75L) Arc Flat Washer Swirl Spring Air Shock Lift the aluminum wing and top cover, then take apart the front and rear...
  • Page 70 ChAPter 5: ASSeMbly InStrUCtIonS 5.7 G7-S40 ArM CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Nut (M10) Flat Washer (M8) Flat Washer (M10) Cover Cam Stopper Rubber Screw (M8) Cap Nut (M10) Screw (M10 x 40L) Stopper Plate Screw (M10 x 25L) Screw (M6 x 12L) Flat Washer (M6)
  • Page 71 ChAPter 5: ASSeMbly InStrUCtIonS 5.7 G7-S40 ArM CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Pulley Cover Screw (M8 x 25L) Connecting Rod Swirl Spring Shaft...
  • Page 72 ChAPter 5: ASSeMbly InStrUCtIonS 5.7 G7-S40 ArM CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Screw (M10 x 20L) Screw (M10 x 75L)
  • Page 73 ChAPter 5: ASSeMbly InStrUCtIonS 5.7 G7-S40 ArM CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Right Front Shield Rear Shield Left Rear Shield Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 74: G7-S42 Tricep Pressdown Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Tricep Pressdown is 366 lbs (166 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 309 lbs (140 kg).
  • Page 75 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Lift the aluminum wing and top cover, then take apart the front Screw (M10 x 75L) and rear shields. Q11 bolts will not be used anymore for the wing Screw (M10 x 25L) and cover re-assembly.
  • Page 76 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Pulley Nylon Nut (M10) Axle Pulley Cover Pulley Cover Screw (M10 x 15L) Screw (M8 x 25L) Flat Washer (M8) Washer Clip Screw (M10 x 15L) Axle Sleeve Screw (M8 x 20L) Screw (M6 x 15L)
  • Page 77 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Cable Fixing Pin Flat Washer C Clip...
  • Page 78 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Pulley Cover Screw (M8 x 25L) Connecting Rod Swirl Spring Shaft...
  • Page 79 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 80 ChAPter 5: ASSeMbly InStrUCtIonS 5.8 G7-S42 trICeP PreSSDoWn ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Right Front Shield Rear Shield Lift the wing and front cover, then assemble the front and rear shields to the frame. Left Front Shield Screw (M8 x 60L)

  • Page 81: G7-S51 Abdominal Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Abdominal Crunch 332 lbs (151 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 239 lbs (108 kg).
  • Page 82 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M10 x 75L) Screw (M10 x 30L) Spring Washer (M10) Arc Flat Washer Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 83 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Flat Washer (M12) Special Screw (M8) Flat Washer (M10) Flat Key Screw (M6 x 15L) Flat Washer (M10) Nylon Nut (M12) Screw (M10 x 140L)
  • Page 84 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Arc Flat Washer (M8) Screw (M8 x 15L) Pulley Cover Screw (M8 x 25L) Connecting Rod Swirl Spring Shaft Screw (M8 x 10L)
  • Page 85 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Flat Washer (M8) Stopper Plate Snug Plate Housing Ring Fixing Block Screw Cap Nut (M8) Screw (M10 x 75L) Spring Washer (M10) Screw (M10 x 20L) Screw (M8 x 65L)
  • Page 86 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 20L) Screw (M10 x 20L) Screw (M10 x 20L)
  • Page 87 ChAPter 5: ASSeMbly InStrUCtIonS 5.9 G7-S51 AbDoMInAl CrUnCh ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Right Front Shield Rear Shield Left Front Shield Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 88: G7-S52 Back Extension Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Back Extension is 366 lbs (166 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 309 lbs (140 kg).
  • Page 89 ChAPter 5: ASSeMbly InStrUCtIonS 5.10 G7-S52 bACk eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Screw (M10 x 30L) Flat Washer (M10) Lock Washer (M10) Screw (M8 x 75L) Nylon Nut Arc Flat Washer Screw (M10 x 75L) Screw (M10 x 135L) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 90 ChAPter 5: ASSeMbly InStrUCtIonS 5.10 G7-S52 bACk eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M8) Small Pulley Cover Wave Washer Screw (M10 x 30L) Screw (M8 x 20L) Flat Washer (10.5x42x1.5t) 1...
  • Page 91 ChAPter 5: ASSeMbly InStrUCtIonS 5.10 G7-S52 bACk eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Flat Washer (M10) Lock Washer (M10) Nylon Nut Screw (M10 x 75L) Screw (M10 x 45L)
  • Page 92 ChAPter 5: ASSeMbly InStrUCtIonS 5.10 G7-S52 bACk eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Screw (M10 x 15L)
  • Page 93 ChAPter 5: ASSeMbly InStrUCtIonS 5.10 G7-S52 bACk eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 94: G7-S55 Rotary Torso Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Rotary Torso is 337 lbs (153 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 199 lbs (90 kg).
  • Page 95 ChAPter 5: ASSeMbly InStrUCtIonS 5.11 G7-S55 rotAry torSo ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Screw (M10 X 75L) Screw (M10 x 30L) Spring Washer (M10) Hex Nut (M10 x 1.5P) Screw (M10 x 30L) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 96 ChAPter 5: ASSeMbly InStrUCtIonS 5.11 G7-S55 rotAry torSo ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Flat Washer (M8) Screw;Hex Socket (M10) 4 Screw (M10) Screw;Oval (M10) Screw;Rnd (M10 x 20L) Spring Screw (M8) Nut (M10 x 1.5P)
  • Page 97 ChAPter 5: ASSeMbly InStrUCtIonS 5.11 G7-S55 rotAry torSo ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Ring;E-Shaped Fixing Pin Washer (6.6x12x1.6T)
  • Page 98 ChAPter 5: ASSeMbly InStrUCtIonS 5.11 G7-S55 rotAry torSo ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Seat Pad Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 99 ChAPter 5: ASSeMbly InStrUCtIonS 5.11 G7-S55 rotAry torSo ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Front Cover;Left Front Cover;Right Cover;Rear Screw;Hex Socket Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 100: G7-S57 Calf Extension Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Calf Extension is 376 lbs (171 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 199 lbs (90 kg).
  • Page 101 ChAPter 5: ASSeMbly InStrUCtIonS 5.12 G7-S57 CAlf eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Lift the aluminum wing and top cover, then take apart the front and rear shields. Q11 bolts will Flat Washer (M10) not be used anymore for the wing and cover Nut (M10) re-assembly.
  • Page 102 ChAPter 5: ASSeMbly InStrUCtIonS 5.12 G7-S57 CAlf eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Screw (M6 x 8L) Flat Washer (M8) Lock Washer (M8) Washer (M6) Screw (M8 x 20L) Screw (M6 x 20L) Screw (M6 x 15L)
  • Page 103 ChAPter 5: ASSeMbly InStrUCtIonS 5.12 G7-S57 CAlf eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Flat Washer (M10) Pulley Cable Clip; E-Shaped Screw (M10 x 75L)
  • Page 104 ChAPter 5: ASSeMbly InStrUCtIonS 5.12 G7-S57 CAlf eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Shroud;Right Front Shroud;Rear Shroud;Left Front Screw (M8 x 60L) Screw (M10 x 75L) Screw (M10 x 15L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 105: G7-S70 Leg Press Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Leg Press is 531 lbs (241 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 351 lbs (159 kg).
  • Page 106 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M10 x 80L) Screw (M10 x 30L) Spring Washer (M10) Arc Flat Washer Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 107 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M6 x 16L) Flat Washer (M6) Screw (M10 x 80L) Spring Washer (M10) Screw (M10 x 25L) Flat Washer (M10) Take the plastic cover off before assembling the foot pad.
  • Page 108 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Fixing Sleeve Stopper Plate Axle Sleeve Clip;Internal;C Type Flat Washer (M10) Screw (M10 x 20L)
  • Page 109 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M8 x 22L) Stopper Plate Fixing Block Screw (M10 x 45L) Flat Washer (M10) Screw (M10 x 105L)
  • Page 110 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Cap End Screw (M10 x 75L) Screw (M10 x 15L)
  • Page 111 ChAPter 5: ASSeMbly InStrUCtIonS 5.13 G7-S70 leG PreSS ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Right Front Shield Rear Shield Left Front Shield Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 112: G7-S71 Leg Extension Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Leg Extension is 645 lbs (293 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 296 lbs (135 kg).
  • Page 113 ChAPter 5: ASSeMbly InStrUCtIonS 5.14 G7-S71 leG eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer Nylon Nut (M10) Screw (M10 x 25L) Screw (M10 x 75L) Lock Washer Arc Flat Washer...
  • Page 114 ChAPter 5: ASSeMbly InStrUCtIonS 5.14 G7-S71 leG eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer Short Shaft Screw (M8 x 25L) Shaft Links Swirl Spring Spacer Orange Cap Spring Washer Flat Washer Spring Washer Screw (M10 x 25L) Screw (M10 x 100L) Nut (M10) Special Flat Washer...
  • Page 115 ChAPter 5: ASSeMbly InStrUCtIonS 5.14 G7-S71 leG eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Flat Washer Nylon Nut (M10) Stopper Plate Stopper Sleeve Pad Plate Cam Snug Plate Hex Screw Cable Plate Space Fixing Block Screw (M10 x 75L) Screw (M8 x 15L) Flat Washer Lock Washer...
  • Page 116 ChAPter 5: ASSeMbly InStrUCtIonS 5.14 G7-S71 leG eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer Front Leg Pad Seat Pad Back Pad Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 117 ChAPter 5: ASSeMbly InStrUCtIonS 5.14 G7-S71 leG eXtenSIon ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Screw (M8 x 60L)

  • Page 118: G7-S72 Seated Leg Curl Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Seated Leg Curl is 664 lbs (302 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 247 lbs (112 kg).
  • Page 119 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer Nylon Nut (M10) Screw (M10 x 25L) Screw (M10 x 75L) Lock Washer Arc Flat Washer Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 120 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Axle Short Shaft Screw (M8 x 25L) Links Swirl Spring Spacer Flat Washer Lock Washer Screw (M10 x 25L) Special Flat Washer Screw (M8 x 25L)
  • Page 121 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD Item Description Quantity SteP 3 Flat Washer Shaft Screw (M10 x 34L) Small Shaft Balance Brick Screw (M8 x 25L) Lock Washer Lock Washer Flat Washer Screw (M6 x 12L) Flat Washer Nut Cap Screw (M10 x 100L)
  • Page 122 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer Nylon Nut (M10) Socket Screw Cable Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 123 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Flat Washer Screw (M8 x 20L) Settle Screw Cap End Stopper Ring Cap Plate Screw (M10 x 75L) Screw (M10 x 20L)
  • Page 124 ChAPter 5: ASSeMbly InStrUCtIonS 5.15 G7-S72 SeAteD leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Screw (M8 x 60L)

  • Page 125: G7-S73 Prone Leg Curl Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Prone Leg Curl is 381 lbs (173 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 200 lbs (91 kg).
  • Page 126 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Lock Washer (M10) Screw (M10 x 75L) Nut (M10) Lift the aluminum wing and top cover, then take apart the front and rear shields.
  • Page 127 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Flat Washer (M10) Screw (M10 x 30L) Lock Washer (M10) Screw (M10 x 75L) Arc Flat Washer...
  • Page 128 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Ring Protect Plate Screw (M8 x 15L) Plate;Cam Lock Fixing Block Cover Screw (M10 x 105L) Screw;Lock Cable Screw (M10 x 20L) Lock Washer (M8) Flat Washer (M8) Flat Washer...
  • Page 129 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Nut; Cap(M10) Flat Washer (M10) Weight Block Shaft Connect Plate Cover;Leg Pad Cover Stop Ring Plastic Tube Leg Pad Screw (M8 x 20L) Flat Washer (M8) Screw (M10 x 20L) Flat Washer (M10.5)
  • Page 130 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Right Front Shield Rear Shield Left Front Shield Screw (M8 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.
  • Page 131 ChAPter 5: ASSeMbly InStrUCtIonS 5.16 G7-S73 Prone leG CUrl ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Chest Pad Seat Pad Chest Pad Fix Plate Screw (M10 x 25L) Screw;Hex (M10 x 25L)

  • Page 132: G7-S74 Hip Adductor Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Hip Adductor is 359 lbs (163 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 239 lbs (108 kg).
  • Page 133 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Spring Washer (M10) Screw (M10 x 30L) Screw (M8 x 60L)
  • Page 134 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Screw (M5 x 12L) Flat Washer (M5) Fixing Sleeve Shaft Wave Washer Screw (M8 x 20L)
  • Page 135 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Screw (M5 x 12L) Flat Washer (M5) Fixing Sleeve Shaft Wave Washer...
  • Page 136 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M6 x 45L) Stopper Plate Flat Washer (M8) Fixing Block Fixing Block Cable Cable Screw (M10 x 105L)
  • Page 137 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Spring Washer (M8) Cable Screw (M8 x 20L) Stopper Plate Screw (M5 x 12L) Flat Washer (M8)
  • Page 138 ChAPter 5: ASSeMbly InStrUCtIonS 5.17 G7-S74 hIP ADDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Screw (M10 x 20L) Screw (M10 x 75L) Stopper Bolt Flat Washer...

  • Page 139: G7-S75 Hip Abductor Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Hip Abductor is 359 lbs (163 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 239 lbs (108 kg).
  • Page 140 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 1 Item Description Quantity Flat Washer (M10) Spring Washer (M10) Screw (M10 x 30L) Screw (M8 x 60L)
  • Page 141 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Screw (M5 x 12L) Flat Washer (M5) Fixing Sleeve Shaft Wave Washer Screw (M8 x 20L)
  • Page 142 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Screw (M5 x 12L) Flat Washer (M5) Fixing Sleeve Shaft Wave Washer...
  • Page 143 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 4 Item Description Quantity Flat Washer (M10) Nylon Nut (M10) Screw (M6 x 45L) Stopper Plate Flat Washer (M8) Fixing Block Fixing Block Cable Cable Screw (M10 x 105L)
  • Page 144 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Spring Washer (M8) Cable Screw (M8 x 20L) Stopper Plate Screw (M5 x 12L) Flat Washer (M8)
  • Page 145 ChAPter 5: ASSeMbly InStrUCtIonS 5.18 G7-S75 hIP AbDUCtor ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Screw (M10 x 20L) Screw (M10 x 75L) Flat Washer...

  • Page 146: G7-S78 Glute Assembly Instructions

    CAUtIon The weight of the Matrix Fitness Systems Glute is 372 lbs (169 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing the unit from its pallet during assembly. The weight stack for this machine is 199 lbs (90 kg).
  • Page 147 ChAPter 5: ASSeMbly InStrUCtIonS 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD Lift the aluminum wing and top cover, then take apart the front and rear shields. Q11 bolts will not be used anymore for the wing and SteP 1 Item Description Quantity cover re-assembly.
  • Page 148 ChAPter 5: ASSeMbly InStrUCtIonS 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD SteP 2 Item Description Quantity Nylon Nut (M10) Flat Washer (M10) Screw (M10 x 75L) Screw (M10 x 30L) Lock Washer Screw (M10 x 80L) Arc Flat Washer...
  • Page 149 ChAPter 5: ASSeMbly InStrUCtIonS 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD SteP 3 Item Description Quantity Thin Fixing Sleeve Axle Sleeve Cap End Fixing Plate Clip;Internal;C-Shaped Thick Fixing Sleeve...
  • Page 150 ChAPter 5: ASSeMbly InStrUCtIonS Item Description Quantity 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD Nylon Nut (M10) Flat Washer (M10) SteP 4 Pulley Cover Small Cam Stopper Plate Screw (M10 x 46L) Big Cam Fixing Block Flat Washer (M8) Screw (M10 x 110L) E Clip Z102 Fixing Pin...
  • Page 151 ChAPter 5: ASSeMbly InStrUCtIonS 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD SteP 5 Item Description Quantity Special Screw Flat Washer Screw (M10 x 20L) Screw (M10 x 25L)
  • Page 152 ChAPter 5: ASSeMbly InStrUCtIonS 5.19 G7-S78 GlUte ASSeMbly InStrUCtIonS - ContInUeD SteP 6 Item Description Quantity Screw (M10 x 60L) Lift the wing and front cover, then assemble the front and rear shields to the frame.

  • Page 153: Chapter 6: Troubleshooting

    ChAPter 6: troUbleShootInG 6.1 troUbleShootInG - rePetItIon CoUnter ISSUeS the rePetItIon CoUnter IS blAnk or IS not CoUntInG MoVeMentS PoSSIble CAUSeS 1) The rep counter battery is dead or disconnected. 2) The rep counter is unplugged from the repetition sensors. 3) The magnet is missing or mispositioned.
  • Page 154 ChAPter 6: troUbleShootInG 6.1 troUbleShootInG - rePetItIon CoUnter ISSUeS - ContInUeD MoDel # loCAtIon loCAtIon loCAtIon Shoulder Press Chest Press Lat Pull Down Seated Row Leg Extension Seated Leg Curl Arm Curl Tricep Press (Seated Dip) Abdominal Crunch Leg Press Hip Adduction Hip Abduction Pec Fly...

  • Page 155: Troubleshooting - Incremental Weight Pin Issues

    ChAPter 6: troUbleShootInG 6.2 troUbleShootInG - InCreMentAl WeIGht PIn ISSUeS InCreMentAl WeIGht PIn IS looSe or feelS SloPPy PoSSIble CAUSeS 1) The snap ring holding the incremental weight pin in position is damaged or missing. 2) The incremental weight pin is damaged. SolUtIon 1) Remove the weight stack covers.

  • Page 156: Troubleshooting - Arms Are Uneven

    ChAPter 6: troUbleShootInG 6.3 troUbleShootInG - ArMS Are UneVen ArMS Are not eVen At the StArtInG PoSItIon PoSSIble CAUSeS 1) The arm tie rods are uneven. 2) The arms are bent or uneven. 3) The frame is bent or uneven. SolUtIon 1) The tie rods on the Shoulder Press, Chest Press, Lat Pull Down and Seated Row are adjustable.

  • Page 157: Troubleshooting - Weight Stack Pin Issues

    ChAPter 6: troUbleShootInG 6.4 troUbleShootInG - WeIGht StACk PIn ISSUeS WeIGht StACk PIn WIll not Go Into SoMe or All WeIGht PlAteS PoSSIble CAUSeS 1) The weight stack pin is bent. 2) The cable is attached too loosely or too tightly. 3) The weight plates are not seated correctly at the bottom of the guide rods.

  • Page 158: Troubleshooting - Seat Issues

    ChAPter 6: troUbleShootInG 6.5 troUbleShootInG - SeAt ISSUeS SeAt IS too looSe or not SPrInGInG UP PoSSIble CAUSeS 1) The swirl springs are mispositioned or missing from the connecting rods. 2) The swirl springs are broken in the connecting rods. SolUtIon 1) Remove the bottom seat connecting bars (Figures A &...

  • Page 159: Troubleshooting - Abdominal Arms Uneven

    6.6 troUbleShootInG - AbDoMInAl UPPer ArMS UneVen AbDoMInAl UPPer ArMS Are UneVen PoSSIble CAUSeS 1) The bolt / nut holding the upper arm frame to the main frame are not tight enough. SolUtIon 1) Tighten the bolt / nut holding the upper arm frame to the main frame (Figure A). This bolt / nut should be tightened to 100 N-m torque. fIGUre A...

  • Page 160: Troubleshooting - Pec Fly Arms Are Uneven

    6.7 troUbleShootInG - PeC fly ArMS Are UneVen PeC fly ArMS Are UneVen or Don't Meet In the MIDDle PoSSIble CAUSeS 1) The cables under the seat are not adjusted correctly. SolUtIon 1) Loosen the nuts holding the 2 cables to the cam below the right arm (Figures A & B). a.

  • Page 161: Troubleshooting - Chest Press Arm Issues

    6.8 troUbleShootInG - CheSt PreSS ArM ISSUeS CheSt PreSS ArMS Are UneVen, Wobbly, or If the MoVeMent DoeS not feel CorreCt PoSSIble CAUSeS 1) The arms do not have the correct combinaltion of washers and bushings. SolUtIon 1) Remove the bolt holding the arms to the frame. a.

  • Page 162: Chapter 7: Part Replacement Instructions

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.1 teStInG the UnIt onCe the UnIt or rePlACeMent PArt*** IS fUlly InStAlleD AnD ASSeMbleD AnD ProPerly PlACeD on the floor, USe the folloWInG InStrUCtIonS to teSt the MAChIne: ***note - not all of the replacement instructions will apply to every model. 1) Check that the weight stack pin will slide freely into the weight stack at all positions.

  • Page 163: Aluminum Wing Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.2 AlUMInUM WInG rePlACeMent 1) Remove the 4 screws going through the aluminum wing into the top cover of the weight stack (Figure A). 2) Disconnect the repetition counter wire and remove the aluminum wing and top cover from the weight stack (Figure B). 3) Remove the 4 screws attaching the aluminum wing to the top cover (Figure C).

  • Page 164: Top Cover Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.3 toP CoVer rePlACeMent 1) Remove the 4 screws going through the aluminum wing into the top cover of the weight stack (Figure A). 2) Disconnect the repetition counter wire and remove the aluminum wing and top cover from the weight stack (Figure B). 3) Remove the 4 screws attaching the aluminum wing to the top cover (Figure C).

  • Page 165: Repetition Counter Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.4 rePetItIon CoUnter rePlACeMent 1) Remove the 4 screws going through the aluminum wing into the top cover of the weight stack (Figure A). 2) Disconnect the repetition counter wire and remove the aluminum wing and top cover from the weight stack (Figure B). 3) Remove the 2 screws attaching the repetition counter to the top cover (Figure C).

  • Page 166: Weight Stack Shroud Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.5 WeIGht StACk ShroUD rePlACeMent 1) Remove the 4 screws going through the aluminum wing into the top cover of the weight stack (Figure A). 2) Disconnect the repetition counter wire and remove the aluminum wing and top cover from the weight stack (Figure B). 3) Pull up on each weight stack shroud and remove it from the weight stack frame (Figure C).

  • Page 167: Repetition Sensor Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.6 rePetItIon SenSor rePlACeMent 1) Remove the 4 screws going through the aluminum wing into the top cover of the weight stack (Figure A). 2) Disconnect the repetition counter wire and remove the aluminum wing and top cover from the weight stack (Figure B). 3) Remove the front weight stack covers from the weight stack frame (Figure C).

  • Page 168: Incremental Weight Pin Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.7 InCreMentAl WeIGht PIn rePlACeMent 1) Remove the weight stack shrouds as outlined in Section 7.5. 2) Remove the 4 screws holding on the clear plastic cover over the incremental weight pin and remove it (Figures A & B). 3) Remove the 2 screws holding on the reaction block and remove it (Figures C &...
  • Page 169 ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.7 InCreMentAl WeIGht PIn rePlACeMent - ContInUeD fIGUre e fIGUre f fIGUre G...

  • Page 170: Weight Plate Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.8 WeIGht PlAte rePlACeMent 1) Remove the weight stack shrouds as outlined in Section 7.5. 2) Remove the 4 screws holding on the clear plastic cover over the incremental weight pin and remove it (Figures A & B). 3) Remove the 2 screws holding on the reaction block and remove it (Figures C &...
  • Page 171 ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.8 WeIGht PlAte rePlACeMent - ContInUeD fIGUre e fIGUre f fIGUre G fIGUre G...

  • Page 172: Weight Stack Pulley Assembly Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.9 WeIGht StACk PUlley ASSeMbly rePlACeMent 1) Remove the weight stack shrouds as outlined in Section 7.5. 2) Remove the 4 screws holding on the clear plastic cover over the incremental weight pin and remove it (see Section 7.8 for pictures). 3) Move the rubber cover on the cable by pulling up on it (Figure A).

  • Page 173: Small Connecting Rod Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.10 SMAll ConneCtInG roD rePlACeMent 1) Remove the 2 screws going into the connecting rod (Figure A). 2) Remove the connecting rod (Figure B). 3) When installing a new connecting rod, make sure that the swirl spring is present and properly installed (there should be at least 2 swirl springs for each set of 4 connecting rods) (Figures C &...

  • Page 174: Large Connecting Rod Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.11 lArGe ConneCtInG roD rePlACeMent 1) Remove the 4 screws holding on the seat pad and remove it (Figure A). 2) Move the back pad to the position furthest to the front of the unit - this will remove most of the tension on the connecting rod springs (Figure 3) Remove the 2 screws holding on the connecting rod and remove it (Figures C &...
  • Page 175 ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.11 lArGe ConneCtInG roD rePlACeMent - ContInUeD fIGUre e fIGUre f fIGUre G fIGUre h...

  • Page 176: Adjustable Tie Rod Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.12 ADJUStAble tIe roD rePlACeMent 1) Remove the screw holding the adjustable tie rod to the arm (Figure A). 2) Pull the adjustable tie rod off of the arm (Figure B). NOTE: Be sure to support the arm so that it does not swing away and cause damage or injury.

  • Page 177: Hand Grip Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.13 hAnD GrIP rePlACeMent 1) Remove the 2 set screws holding the hand grip end cap to the frame (Figure A). 2) Remove the hand grip end cap (Figure B). 3) Loosen the screw holding together the hand grip bottom end cap (Figure C). 4) Pull and remove the rubber hand grip and bottom end cap (Figure D).

  • Page 178: Seat Pad Adjustment Handle Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.14 SeAt PAD ADJUStMent hAnDle rePlACeMent 1) Loosen the lock nut on the seat adjustment handle by turning it clockwise (Figure A). 2) Remove the seat adjustment handle by turning it counter-clockwise (Figure B). 3) Reverse Steps 1-2 to install a new seat adjustment handle. fIGUre A fIGUre b...

  • Page 179: Back Pad Adjustment Handle Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.15 bACk PAD ADJUStMent hAnDle rePlACeMent 1) Use a large channel lock pliers or crescent wrench to turn the back pad adjustment handle counter-clockwise (Figure A). 2) Pull the back pad adjustment handle out of the frame (Figure B). 3) Reverse Steps 1-3 to install a new back pad adjustment handle.

  • Page 180: Arm Adjustment Handle Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.16 ArM ADJUStMent hAnDle rePlACeMent 1) Remove the screw holding the arm adjustment handle to the frame from the back side (Figure A). 2) Pull the arm adjustment handle out of the frame (Figure B). 3) Reverse Steps 1-3 to install a new arm adjustment handle.

  • Page 181: Rom Adjustment Handle Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.17 roM ADJUStMent hAnDle rePlACeMent 1) Remove the 2 set screws holding the adjustment handle end cap to the frame (Figure A). 2) Remove the adjustment handle end cap (Figure B). 3) Remove the long orange tube going down into the adjustment handle (Figure C). 4) Loosen the screw holding together the bottom adjustment handle end cap (Figure D).

  • Page 182: Head Pad Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.18 heAD PAD rePlACeMent 1) Remove the 2 screws holding the head pad / back cover to the frame (Figure A). NOTE: One of the screws may be covered by the U frame (Figure B). 2) Remove the head pad / back cover (Figure C).

  • Page 183: Back Pad Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.19 bACk PAD rePlACeMent 1) Remove the 2 screws holding the back pad / back cover to the frame (Figure A). 2) Remove the back pad / back cover (Figure B). 3) Reverse Steps 1-2 to install a new back pad. fIGUre A fIGUre b...

  • Page 184: Seat Pad Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.20 SeAt PAD rePlACeMent 1) Remove the 4 screws holding the seat pad to the frame (Figure A). NOTE: You may need a short Allen wrench for some models (Figure B). 2) Remove the seat pad (Figure C). 3) Reverse Steps 1-2 to install a new seat pad.

  • Page 185: Round Pad Replacement

    ChAPter 7: PArt rePlACeMent InStrUCtIonS 7.21 roUnD PAD rePlACeMent 1) Use a flat screwdriver to pry off the round pad end cap (Figure A). 2) Remove the screw holding on the round pad (Figure B). 3) Slide the round pad off of the frame (Figure C). 4) Reverse Steps 1-3 to install a new round pad.
  • Page 186 noteS...
  • Page 187 MAtrI X fItn e S S Sy S teM S C or P. 1610 LANDM ARK D RIV E C OTTA GE G R OV E W I 5 352 7 U S A w w w. m a t r i x f i t n e s s . c o m TOLL FREE 866.693.4863 FA X 60 8.

Table of Contents

Save PDF