Sony HDC-P1 Maintenance Manual page 90

4-2. Operator File
Operator fi le stores data in the Memory Stick Duo.
Data is stored and read using the setup menu.
m
. Operator fi le data stored in the Memory Stick Duo cannot be read when the power is just turned ON.
. The current operator fi le data is retained even when the power is turned off by the power switch.
. Before storing data in the Memory Stick Duo, make sure that the LOCK switch on the Memory Stick
Duo is set to OFF.
Storing (Refer to step 1 of Fig. 4-2.)
Using OPERATION Menu of This Unit
Stores the current status in the Memory Stick Duo.
Reading (Refer to step 2 of Fig. 4-2.)
Using OPERATION Menu of This Unit
Memory Stick Duo
Reading Storing
(Step 2)
(Step 1) Camera unit
Calling
(Step 3) Initializing
(Step 5)
Preset Operator File
Current Operator
Preset Operator File
Factory-set
File Data
value
Storing
(Step 4)
Output to hardware
Fig. 4-2. Operator File Operating Procedure
4-2 (E)
HDC-P1