Sony HDC-P1 Maintenance Manual page 38

11. Remove the three screws and remove the
transportation case from the CCD unit for
repair (option).
12. Install the CCD unit for repair by reversing
the steps above.
n
When attaching the fi lter knob (ND) and the fi lter
knob (CC), apply locking compound to the
threads of the four setscrews.
Work after replacement
Perform the following after the CCD unit is
replaced.
. "3-9. TEST SAW Level Adjustment"
2-2 (E)
Transportation case Transportation case
P3 x 6 P3 x 6
Setscrews Setscrews
Apply locking Apply locking
compound compound
Filter knob (ND) Filter knob (ND)
CCD unit for repair CCD unit for repair
Apply locking Apply locking
compound compound
Filter knob (CC) Filter knob (CC)
Apply locking Apply locking
compound compound
Setscrews Setscrews
Apply locking Apply locking
compound compound
HDC-P1