Seat Alhambra 2015 Owner's Manual page 88

This function can be activated and deactiva-
ted by pressing the rear-view mirror switch
›››
Fig. 70 . When it is activated, the warn-
2
ing lamp lights up .
1
When the ignition is on, the sensor
matically moves the rear vision mirror to the
anti-dazzle position depending upon the in-
cidence of the light from behind.
The automatic anti-dazzle function is deacti-
vated when reverse gear is engaged or the in-
terior or reading lights are on.
Note
If the light is obstructed or prevented from
reaching the sensor, e.g. by the sun blinds,
the rear vision mirror with automatic anti-
dazzle function will not operate correctly.
86
Operation
Exterior mirrors
auto-
3
Fig. 71 In the driver door: exterior mirror con-
trols
Turn the knob to the required position:

Electric folding exterior mirrors
Switch on the exterior mirror heating This only

heats up if the ambient temperature is less
than +20 °C (+68 °F).
Adjust the left-hand exterior mirror by turning

the knob forward, backward, to the right or to
the left.
Adjust the right-hand exterior mirror by turning

the knob forward, backward, to the right or to
the left.
Zero position. Exterior mirror unfolded, exterior

mirror heating off, adjustment of exterior mir-
ror not possible.
Synchronised mirror adjustment
In the Settings - Convenience menu, select
●
whether or not the mirrors should move in
synchronisation
● Turn the knob to position L.
Adjust the left-hand exterior mirror. The
●
right exterior mirror will be adjusted at the
same time (synchronised).
● If necessary the right exterior mirror adjust-
ment may need correcting. turn the control to
position R.
Automatic anti-dazzle exterior mirror, driver
side
The automatic anti-dazzle exterior mirror is
controlled in the same way as the automatic
›››
.
anti-dazzle rear vision mirror
Store the reverse settings for the passenger
exterior mirror
● Select the vehicle key in which the setting
is to be stored.
● Use this key to unlock the vehicle.
● Connect the automatic parking brake.
● Switch the ignition on.
● Move the gear lever to neutral.
● In the menu Settings - Convenience activate
the function Mirror adjustment .
● Select reverse gear.
›››
page 47.
›››
page 85.