Seat Alhambra 2015 Owner's Manual page 33

seat so that the child has enough space.
Therefore, adapt the front passenger seat to
the size of the child seat and the height of
the child. Ensure the passenger is in the cor-
›››
rect position page 6.

Move the second and third rows of seats fully
back and lock them. Place the seat backs in a
vertical position and fold the head restraints
down.
ISOFIX child seats approved for rear seats
The rear seats are suitable for child seats
with the ISOFIX system specially designed
for this type of vehicle in accordance with
regulation ECE-R 44.
ISOFIX child seats are divided into "specific
categories for the vehicle", "limited" or
"semi-universal".
Child seat manufacturers supply a list of ve-
hicles with each ISOFIX seat, which includes
the models for which the ISOFIX child seat in
question is approved. If the vehicle is inclu-
ded in the manufacturer's list and the ISOFIX
child seat belongs to a seat category inclu-
ded in the list, then it can be used in your ve-
hicle. If necessary, contact the child seat
manufacturer for an updated list of vehicles.
Transporting children safely
Group
ISOFIX child Seat position in
(weight
seat category the rear seats
category)
Group 0:
E
to 10 kg
E
Group 0+:
D
to 13 kg
C
D
C
Group 1:
B
9 to 18 kg
B1
A
a) IUF: suitable for "universal" ISOFIX child seats authorised for
use in this group.
WARNING
If child seats are fitted to all the seats in the
second row then it is possible that the seats
of this row cannot be folded down from the
third row of seats in case of an accident. In
the event of an emergency, passengers in the
third row of seats will not be able to leave the
vehicle or to help themselves.
Child seats should never occupy all the
●
seats of the second row if other passengers
are to occupy the third row of seats.
Securing child seats with the seat belt
Securing the child seat using the seat belt
Please read and observe the child seat
●
manufacturer's handling instructions.
a)
IUF
Positioning the child seat on the seat ac-
●
a)
IUF
cording to the manufacturer's instructions.
The seat belt height adjustment must be as
IUF a) ●
high as possible.
a)
IUF
Fasten the seat belt or pass it around the
●
a)
IUF
child seat structure in the manner described
in the manufacturer's instructions.
IUF a)
● Make sure the seat belt is not twisted.
a)
IUF
Insert the latch plate into the buckle for the
●
a)
IUF
appropriate seat and push it down until it is
securely locked with an audible click.
IUF a)
● Ensure that the upper belt web lies tightly
on the child seat.
● Pull the belt (it must be no longer possible
to pull the lower belt webbing out).
Removing the child seat
The seat belt must not be unfastened until
the vehicle has come to a standstill
Press the red button on the buckle. The
●
latch plate is released from the buckle.
Guide the belt back by hand so that it rolls
●
up easily and the trim will not be damaged.
● Remove the child seat from the vehicle.
›››
.
»
31