Seat Alhambra 2015 Owner's Manual page 271

Turn signals (small lamp holder)
6. Place the bulb holder in the headlight and rotate to the right all the way.
7.
Note
The images show the left hand headlight
from behind. The structure of the right hand
side headlight is symmetric.
To replace the xenon headlights bulb
Fig. 213 In the engine compartment: turn sig-
nal indicator cover.
Fuses and bulbs
A B
Dipped beam Daytime driving
headlights light
Fig. 214 Turn signal lamp holder
ing light
2
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
Turn signals Turning lights
1
›››
1. Open the bonnet

›››
Rotate the cover Fig. 213 in the direction of the
2.
arrow and remove it.
Main beam headlights
Place the lamp holder in the head-
light and pull the wire clip upwards
until it clicks into place.
Insert the rubber cover.
Turn signals
Rotate the lamp holder
›››
Fig. 214
1
3. left all the way and pull
it out backwards with
the bulb.
Depending on the model, the bulb is removed di-
4. rectly from the lamp holder or it may need to be ro-
5. Replace the faulty bulb by a new identical bulb.
and turn-
1
Place the bulb holder in
the headlight and ro-
6.
tate to the right all the
way.
Rotate the cover
7.
tion to the arrow as far as it will go.
2
Always seek the help of a specialist when
page 214.
changing the Xenon dipped beam and main
beam headlamps
page 267.
C
Side lights
Place the lamp holder in the head-
light and insert completely.
Turning lights
1 2
Press the wire clip
to the downwards and pull the
lamp holder
2
›››
Fig. 214 out with the
bulb.
tated and then removed.
Place the lamp holder
in the headlight and
pull the wire clip up-
wards until it clicks into
place.
›››
Fig. 213 in the opposite direc-
›››
in Introduction on
»
269