Unfolding the integrated child seat
Integrated child seats. lift up the
Fig. 28
cushion
34
Safety
Fig. 29
Integrated child seats. position the
head restraint over the side head restraint A
and fit into place B.
The integrated child seat can be fitted with a
side head restraint. SEAT recommends al-
ways using the integrated child seat with the
side head restraint fitted and only using it for
children above the age of 3.
Lifting the cushion
›››
Pull the unlock lever
Fig. 28
●
cushion in the direction of the arrow
›››
Fig. 28
.
1
›››
●
Fold both sides
Fig. 28
B
›››
Fig. 28
rection of the arrow
›››
●
Push the cushion
Fig. 28
C
›››
Fig. 28
direction of the arrow
gages.
Fitting the side head restraint
●
Fold the seat backrest of the rear seat for-
›››
page
93.
wards
●
Remove the head restraint.
Make sure the belt guide handle on the
●
window side is on the side head restraint
›››
page
35.
›››
●
Insert the guide rods
Fig. 29
head restraint into the guides on the side
›››
head restraint
Fig. 29
.
2
●
Insert the head restraint and the side head
restraint into the guides on the correspond-
›››
ing seat backrest
Fig. 29
B.
Push the head restraint down as far as it
●
will go.
Fold the seat backrest of the rear seat back.
●
●
Pull the rear seat and the seat backrest to
check whether they are engaged properly.
on the
A
up in the di-
.
2
back in the
until it en-
3
A
of the
1