Seat Alhambra 2015 Owner's Manual page 274

Tail lights on bodywork: Remove the
Fig. 220
bulb holder. to : Attachment tab
1 4
Complete operations only in the sequence
given.
Removing the tail light units
Complete operations only in the sequence
given:
Tail light, left
1. Open the rear lid
Open the storage com-
partments on the left-
2. hand side of the lug-
gage compartment
›››
page 112.
Rotate the cap 90°
1
3. in the direction of the
arrow and remove it.
272
Unscrew the attachment screw
4.
›››
Extract the tail light from the bodywork by carefully
5.
Pull the red strip on the connector and extract the
6.
Disassemble the tail light unit and place it on a
7.
To change the bulb
To release the bulb holder, press on the attach-
8. ment tabs
the arrow.
9. Remove the lamp holder from the tail light unit.
10. Replace the faulty bulb by a new identical bulb.
Place the lamp holder in the tail light unit. The at-
11.
tachment tabs should audibly click into place.
Tail light, right
Insert the connector and press the red attachment
12.
strip in so that the connector is locked into place.
›››
page 66.
Move the 12 V power
Assembling the tail light units
socket support by
Complete operations only in the sequence
pressing gently down-
›››
Fig. 219
wards
B given:
(arrow).
Advice
Tail light, left Tail light, right
›››
Fig. 219
ing the screwdriver from the vehicle tool kit
page 244. The bolt is secured in its position.
pulling backwards.
connector.
flat, clean surface.
›››
Fig. 220
to in the direction of
1 4
Tail light, left
us- Carefully insert the tail light unit into the opening
2
13. in the bodywork. To do this, insert the upper tail
light unit guide into the attachment ring.
Tighten the white attachment screw using the
14.
screwdriver from the vehicle tool kit.
Ensure that the tail light unit has been correctly
15.
fitted and is firmly secured.
Replace the cap
›››
Fig. 219
and ro-
1
16. tate it 90° in the oppo-
site direction of the ar-
row.
Close the storage com-
17.
partment.
18. Close the rear lid
Tail light, right
Move the 12 V power
socket support up-
wards gently until it is
correctly closed.
›››
page 66.