Seat Alhambra 2015 Owner's Manual page 58

Control lamp on the vehicle key
Fig. 41 Control lamp on the vehicle key
When a button on the vehicle key is pressed,
the control lamp flashes
once briefly. If the button is pressed and
held, the indicator blinks several times (e.g.
for the convenience opening function).
When the control lamp does not light upon
pushing a button, the batteries of the key
›››
must be changed page
56
Changing the battery
Fig. 42
er
›››
Fig. 41 (arrow)
56.
Fig. 43
SEAT recommend having the batteries
changed in a specialised workshop.
The battery is located to the rear of the vehi-
cle key, under a cover
When changing the battery, use another bat-
tery of the same model and observe the po-
larity when fitting it
Operation
Vehicle key: battery compartment cov-
Vehicle key: removing the battery
›››
Fig. 42.
›››
.
To change the battery
›››
Unfold the vehicle key shaft
●
● Remove the cover from the back of the ve-
›››
hicle key Fig. 42 in the direction of the ar-
›››
row .
Extract the battery from the compartment
●
›››
using a suitable thin object Fig.
● Place the new battery in the compartment,
pressing in the direction of the arrow as
››› ›››
Fig. 43
shown .
● Fit the battery compartment cover, pressing
in the direction of the arrow as shown
›››
Fig. 42 until it clicks into place.
CAUTION
If the battery is not changed correctly, the
●
vehicle key may be damaged.
Use of unsuitable batteries may damage
●
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specifications.
For the sake of the environment
● Please dispose of your used batteries cor-
rectly and with respect for the environment.
● The vehicle key battery may contain per-
chlorate. Observe the legal requirements for
their disposal.
page 54.
43.