Seat Alhambra 2015 Owner's Manual page 52

Menu Function
Mobile telephone pre-installa-
Tele-
tion set up information and
phone
options
Information and configura-
tions of the parking heating:
Parking
switching the parking heating
heating
on or off. Select the operating
mode and duration.
Current warning or informa-
tion texts.
This option only appears
Vehicle
when one of the following
condition
texts is available. The number
of available messages is dis-
played. Example 1/1 or 2/2.
Different setting options, for
example, the Convenience,
Lighting & Visibility menus,
Configu-
and the time, speed warning
ration
with winter tyres, language,
units of measurement, or "Dis-
play off".
MFI (multifunction display) menu
The multifunction display (MFI) has two auto-
matic memories: 1 - Partial memory and 2 -
Total memory. The selected memory will be
50
Operation
shown in the upper right-hand corner of the
See
display.
›››
Book-
let Radio
With the ignition switched on, and memory 1 or
›››
or Book-
2 displayed, briefly press
let Naviga-
one memory to another.
tion sys-
tem
The memory stores the values for the
journey and the consumption from the
Trip moment the ignition is switched on until
›››
page
memory it is switched off again.
128
(for a If the journey is broken for more than 2
1
single hours, the memory is automatically
jour- erased. If the journey is continued in less
ney). than 2 hours after the ignition is switch-
ed off, the new data is added to the data
already stored in the memory.
›››
page 40
The memory records the values for a spe-
cific number of partial trips, up to a total
Total of 19 hours and 59 minutes or 99 hours
memory and 59 minutes, or 1999.9 km (or miles)
2 (for all for 9999 km (or miles), depending on the
jour- model of instrument panel. On reaching
neys). either of these limits, the memory is au-
›››
page
tomatically erased and starts to count
51
from 0 again.
Possible displays
Menu Function
This indicates the hours (h) and mi-
Journey dura-
nutes (min) since the ignition was
tion
switched on.
Menu
Current fuel
to change from
OK
consumption
Average fuel
consumption
Operating
range
Distance cov-
ered
Average speed
Digital display
of speed
Oil tempera-
ture digital
display
Function
The current fuel consumption while
driving is displayed in l/100 km (or
miles per gallon, mpg); when the en-
gine is running but the vehicle is not
moving, in l/h (or gallons per hour).
When the ignition is switched on, the
average consumption (in l/100 km or
in mpg) is displayed after the vehicle
has moved approximately 100 metres
(328 feet). Otherwise horizontal lines
are displayed. The value shown is up-
dated approximately every 5 seconds.
Approximate distance in km (or miles)
that can still be travelled with the fuel
remaining in the tank, assuming the
same style of driving is maintained.
This is calculated using the current fuel
consumption.
Distance travelled, after ignition is
switched on, in km (or miles).
After the ignition is switched on, the
average speed will be shown after a
distance of approximately 100 metres
(328 feet) has been travelled. Other-
wise horizontal lines are displayed. The
value shown is updated approximately
every 5 seconds.
Current speed displayed digitally.
Updated engine oil temperature digital
display