Seat Alhambra 2015 Owner's Manual page 53

Menu Function
If the stored speed is exceeded (be-
Speed warn- tween 30 - 250 km/h, or 18 -
ing at --- km/h 155 mph), an audible warning is given
together with a visual warning.
Changing between display modes
In vehicles without multifunction steering
●
wheel: press the lever.
Vehicles with a multifunction steering
●
wheel: press or .
 
Storing a speed for the speed warning
● Select the display Speed warning at --- km/h .
Press to store the current speed and
●
OK
switch off the warning.
In addition, set the required speed by
●
pressing the rocker switch on the windscreen
wiper lever or buttons or
 
function steering wheel for 5 seconds. Next,
press again or wait a few seconds. The
OK
speed is stored and the warning activated.
● To switch off, press . The stored speed is
OK
deleted.
Manually erasing memory 1 or 2
● Select the memory to be erased.
Press and hold for approximately 2 sec-
●
OK
onds.
Personalising the displays
It is possible to select which of the displays
in the multifunction display you wish to see
on the instrument panel in the settings
menu. The units of measurement can also be
›››
page
modified
Configuration
Configu-
Function
ration
Menu
Multi-
Configuration of the multifunction display
function
data that you wish to see on the instrument
display
panel display
data
Changing the magnetic region and calibra-
tion of the compass. To calibrate the com-
Compass
pass, please follow the instructions given
on the multi-
on the instrument panel display.
Conven- Changing vehicle convenience functions
›››
ience
Lights & Configuration of vehicle lighting
›››
visibility
Changing the hours and minutes of the in-
strument panel clock and the navigation
system. The time can be set here and the
Time choice can be made between the 24-hour
and 12-hour display. The
part of the display indicates that the clock
is set to summer time.
Cockpit
51.
Menu
›››
page 50.
page 52.
page 52.
in the upper
S
Configu-
ration Function
Menu
Changing the visual and audible speed
warnings. This function should only be
Winter
used when the vehicle is fitted with winter
tyres
tyres, which are not designed for travel at
high speeds.
Changing the language of the display texts
Language
and the navigation system.
Changing the units of measurement for the
Units
temperature, consumption and distance.
Second
Switching second speed display on and off.
speed
Select if the Auto-Hold function should be
Auto-Hold
on permanently.
Check the service notifications or reset the
Service
service intervals to zero.
Some functions of the
Factory Configuration
settings will be reset to the factory value.
The main menu is displayed again.
Back
menu
51