Seat Alhambra 2015 Owner's Manual page 104

● Remove objects from the footwell in front of
and behind the rear seat
● Remove objects from the space below the
rear seat.
● Remove the attachment elements and sup-
ports for the net from the rail system.
›››
● Pull lever Fig. 88
1
seat backrest forwards. The rear seat folds
›››
forward and the cushion also moves for-
ward.
Fold the seat tray forward on top of the fol-
●
ded seat.
When the seat is folded down, no adults or
●
children should travel in it
Putting the seats in the second row back in
place
›››
● Pull lever Fig. 87
1
the seat backrests in vertical position. The
entire seat folds backwards.
● Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
Putting the seats in the third row back in
place
● Open the rear lid.
›››
Pull on the handle Fig. 88
●
seat tray back in position.
102
● Pull on the handle
›››
. seat folds backwards.
● Press on the seat tray in the seat backrest
until it is held in position by its magnets.
● Open the sliding door.
● Put the seat backrest into position and
back and fold the press firmly until it clicks into place.
● Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
WARNING
›››
.
Folding and lifting the rear seats carelessly
without paying attention could cause serious
injury.
Never fold or lift the seats while driving.
●
upwards and place ● Do no trap or damage seat belts when rais-
ing the seat backrest.
Keep your hands, fingers, feet and other
●
body parts out of the hinges and the seat
locking mechanism when folding and unfold-
ing.
● Mats or other objects can be caught in the
hinges of the seat backrests or rear seat. This
could prevent the seat or seat backrest from
locking securely in the vertical position.
All seat backrests must engage correctly for
●
the seat belts on the rear seats to work prop-
to put the erly. When the seat backrest of an occupied
2
seat is not correctly locked in place, the pas-
senger can be thrust forward with the seat
Operation
›››
Fig. 88 . The entire
3
backrest in case of sudden braking, sudden
manoeuvres or an accident.
● No seat must be occupied if the seat back-
rest or seat is folded or not correctly engag-
ed.
CAUTION
Before folding the rear seat backrest, ad-
●
just the front seats so that neither the head
restraint or backrest hit them when folded.
Objects placed in the footrest area in front
●
of and behind the rear seats can be damaged
when seats are folded down or put back into
position. Remove any objects in the way be-
fore folding seats down or repositioning
them.
● Objects placed in the moulding on the back
of the third row of seats can be damaged
when folding down the seats or putting them
back into position. Remove any objects in the
way before folding seats down or reposition-
ing them.
● The attachment elements and supports for
the net partition placed on the rail system
can be damaged when folding down seats
from the third row or putting them back into
position and these can also damage the seats
themselves. Before folding down or reposi-
tioning the seats, remove the attachment ele-
ments and supports for the net from the rail
system.