Macintosh System Requirements - Epson Stylus Pro 11880 User Manual

Caution: Using an
improperly shielded
cable—especially a
cable more than 10 feet
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to run the
printer at full speed.
Visit Epson's U.S. support website
solutions to common problems. You can download drivers, firmware, and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.

Macintosh System Requirements

To use your printer in either a stand-alone or network environment, your
Macintosh ® system should meet these requirements:
Mac OS ® X 10.4.9 or higher, or 10.5 or higher
•
PowerPC ® G5, Intel,
•
At least 1GB of RAM (2GB or more recommended)
•
At least 30GB of free hard disk space for software and processing files
•
Quad-speed (4×) or faster CD-ROM or DVD drive for installing the
•
printer software
For USB connection: a compliant USB Hi-Speed 2.0 port and a
•
shielded USB "AB" cable from Series A (computer) to Series B (printer),
up to 10 feet long
For network connection: Ethernet-equipped Macintosh and a Category
•
6 compatible cable
or Canadian support website
® or higher processor
11
Introduction | 11
for