Epson Stylus Pro 11880 User Manual page 13

Caution: Always turn the
printer off using the P
Power button. When you
press this button, the P
Power light flashes briefly
then goes off. Do not
unplug the printer or turn
off the power to the
printer until the P Power
light stops flashing. This
ensures that the print
head is safely capped.
Keep the printer away from dusty areas.
•
Keep your entire computer system away from potential sources of
•
electromagnetic interference, such as loudspeakers or the base units of
cordless telephones.
Place the printer near a wall outlet where the plug can be easily
•
unplugged.
Use only the type of power source indicated on the label.
•
Connect the printer to a properly grounded outlet. Avoid using an
•
outlet on the same circuit as a photocopier or air control system that
regularly switches on and off.
Avoid using electrical outlets controlled by wall switches or timers.
•
Use only the power cord that comes with the printer. Use of another
•
cord may result in fire or electric shock.
The printer's power cord is designed for use with the printer only. Using
•
it with other equipment may result in fire or electric shock.
Do not use a damaged or frayed power cord.
•
If you use an extension cord with the printer, make sure the total ampere
•
rating of devices plugged into the extension cord does not exceed the
cord's ampere rating. Also, make sure the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet's
ampere rating.
Do not block or cover the openings in the printer's case.
•
Do not put your hand inside the printer during printing.
•
Do not move the print head by hand unless instructed to do so by an
•
Epson service technician; otherwise you may damage the printer.
Do not insert objects through the slots. Take care not to spill liquid on
•
the printer.
Do not attempt to service the printer yourself.
•
13
Introduction | 13