Epson Stylus Pro 11880 User Manual page 146

146 | Solving Problems
Message
INK CARTRIDGE ERROR
PLEASE INSTALL THE
CORRECT CARTRIDGE
INK CARTRIDGE ERROR
REPLACE CARTRIDGE
INK COVER OPEN
CLOSE INK COVER
INK LOW
LEVER RELEASED
LOAD PAPER
LEVER RELEASED
LOWER THE PAPER SET
LEVER
MAINT TANK ERROR
REPLACE THE XXX
MAINTENANCE TANK
MANT TANK FULL
REPLACE THE XXX
MAINTENANCE TANK
MAINTENANCE
PLEASE USE GENUINE
EPSON MAINT TANK
MAINTENANCE
NON-GENUINE MAINT TANK
MAY NOT PERFORM AT
OPTIMUM. CONTINUE?
MAINTENANCE
DO YOU ACCEPT THIS?
<ACCEPT DECLINE>
Explanation
You tried to install an ink
cartridge that cannot be
used with this printer.
Ink cartridge may be
damaged or affected by
condensation.
The indicated ink
compartment cover needs
to be closed.
Ink cartridge(s) are nearly
expended (printing
continues).
Paper is not loaded.
Paper lever is released.
The maintenance tank
indicated is not installed
correctly.
The maintenance tank
indicated is full.
A non-Epson ink
maintenance tank is
installed.
A non-Epson maintenance
tank is installed.
A non-Epson maintenance
tank is installed.
6-146
Response
If you are replacing ink cartridges, check the
package and product code. Replace the
cartridge with a genuine Epson ink cartridge.
If the cartridge is very cold, wait for at least 4
hours until it warms up. Try reinstalling the
cartridge. If the error still appears, install a new
cartridge.
Close the ink compartment cover.
Make sure you have replacement cartridges
available; see page 127. Print quality may
decline when ink is low.
Load paper.
Push the lever back to the secured position.
Replace the maintenance tank.
Note which tank is full and replace it; see
page 135.
Replace the tank with a genuine Epson
maintenance tank.
Replace the tank with a genuine Epson
maintenance tank.
Press the r button to decline and replace the
tank with a genuine Epson maintenance tank.
Pressing the l button to accept may cause
damage not covered by your warranty.