Viewing Status Information - Epson Stylus Pro 11880 User Manual

Note: You can change
the units of
measurement from
centimeters to inches
and feet using
maintenance mode on
the printer's control
panel. See page 131 for
instructions
Maintaining and Transporting the Printer

Viewing Status Information

To view printer status information instead of printing it, follow these steps:
1. Press r .
Menu
2. Press d to select
PRINTER STATUS
3. Do one of the following:
To check the firmware version, press r again. When done, press l.
•
To check the number of pages that can be printed with each ink
•
cartridge, press d to select
d to view the number of pages remaining for each cartridge. When
done, press l.
To check the amount of ink left, press d to select
•
press r. The percentage of ink left in the first cartridge is displayed.
Continue pressing d to see the status of the remaining cartridges.
When done, press l.
To check how much capacity the maintenance tanks have, press d
•
to select
MAINTENANCE TANK
remaining for each tank is displayed. As the tank is filled, the
percentage drops. When done, press l.
To check the amount of ink used (in milliliters) and paper used
•
(in centimeters), press d to select
Clear this setting with the
To check job history, press d to select
•
press r. For the last 10 print jobs saved in the printer, you see the
ink used (in milliliters) and paper used (in square centimeters). The
most recent job is saved as No. 0. When done, press the l button.
To check the total number of prints, press d to select
•
, then press r. When done, press l.
PRINTS
To check the EDM status of the printer, press d to select
•
, then press r. (EDM is a future enhancement.) When
STATUS
done, press l.
4. Press the Pause button to exit the menu.
5-121
, then press r.
, then press r. Press
PRINTABLE PAGES
, then press r. The percentage
USAGE COUNT
CLEAR USAGE COUNT
JOB HISTORY
| 121
, then
INK LEVEL
, then press r.
option.
, then
TOTAL
EDM