104
|
Printing with Epson Drivers for Windows
Normal
cut
Double
cut
Single
cut
7. Choose one of the following
disables automatic cutting. Choose this setting if you want to
•
Off
operate the cutter manually, use the auto take-up reel, or print on
heavy media that must be cut by hand. See page 54 for instructions
on operating the cutter manually.
causes the images to be printed end-to-end and saves
•
Single Cut
paper (when you are printing multiple images). With borderless
printing, you may see a sliver of the previous or next image. You will
see a white margin between print jobs.
•
Normal Cut
image.
extends the space between images and trims each print
•
Double Cut
individually. This provides the cleanest edge for borderless printing.
8. Select these additional roll paper options if necessary:
•
Auto Rotate
the printable width of the roll. The document is automatically
rotated 90 degrees and printed crosswise. Be sure to click
and select the width of your roll paper.
Width
•
Print Page Line
your pages.
9. When you're finished, click
Borderless Printing
For true borderless printing on roll paper, you can select either
or
Expand
Retain Size
page 103. Your image may be clipped on the left and right edges, but you
can minimize clipping by sizing your image according to the page width and
by adjusting the length.
For either setting, you should add 0.1 inch to the length of your custom size.
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting and the Retain Size setting,
you can create a custom paper width equal to the width of the roll media.
4-104
settings (for borderless printing):
Auto Cut
allows margin space at the top and bottom of each
saves paper if your document length is shorter than
prints trim lines on the right and bottom edges of
OK.
and create a custom paper size, as described on
Roll
Auto