Epson Stylus Pro 11880 User Manual page 70

70 | Handling Paper and Other Media
7. Examine the printed pattern for the most evenly overlapping lines.
Choose the number with the most even lines. In the example shown
above, the lines under number 4 are the most even.
After printing the pattern,
8. Press d or u to select the number that you noted in step 7, then press
.
9. Press l, then d for the menu options shown below. Make any
adjustments, as needed, and press
You can also make similar settings using the printer driver software. For
instructions, see page 82 (Mac OS X) or page 109 (Windows).
• CUT METHOD
thinner media, or adjust the speed for thick media. You may need to
experiment to determine the cleanest cut for your paper.
• PPR FEED ADJUSTMENT
lower value if you see white lines on your prints, or a higher value if
you see dark lines.
• DRYING TIME
avoid smearing the ink. You can make the print head wait up to
10 seconds after each pass to allow ink to dry on the page.
• PAPER SUCTION
printing on thin media (under 12 lb), such as drafting paper or
backlight film.
10. When done, press the
After you create paper configurations, you can use the
print out a list of paper numbers showing the settings for each one.
2-70
THICKNESS NUMBER
to save each setting.
lets you decrease the cutting blade pressure for
helps eliminate banding. Choose a
lets you print with non-Epson media and
lets you decrease the paper suction level when
Pause button.
is highlighted.
menu to
TEST PRINT