Epson Stylus Pro 11880 User Manual page 39

Caution: Don't turn off
the printer while the
firmware is updating.
Note: After you install
the software, you need to
load paper and print a
test image. If the print
quality is satisfactory,
your setup is done. If not,
you may need to align the
print head, as described
on page 126.
You see the Firmware Updater window.
5. Make sure your printer is on, its LCD displays
connected to your computer or network, then choose your printer.
6. Click and find the firmware file that you just downloaded and
Browse
extracted. Select the file and click
7. If the firmware version of the file is newer, click
firmware updating process. (If it is the same, you don't need to update.)
8. When the update is complete, close the Firmware Updater window and
Epson LFP Remote window.
If you have not already done so, follow the instructions in the next section to
configure the printer for your network.
1-39
Setting Up the Printer
, and it is
Ready
.
Choose
Update
| 39
to start the