Epson Stylus Pro 11880 User Manual page 64

64 | Handling Paper and Other Media
Note: For heavy paper,
you may need to increase
the suction by pressing
the u button. This helps
hold the paper in place
during loading and
printing.
For lightweight paper,
decrease the suction by
d
pressing the button.
Caution: To avoid
damaging the printer,
never move the paper
lever during printing, or
while the Pause light
is flashing.
4. Feed the sheet into the paper slot. Make sure the right and bottom edges
of the paper are straight and aligned with the horizontal and vertical
lines on the printer.
5. Push the paper lever back to the secured position.
6. Press the Pause button. The sheet feeds into printing position
automatically.
7. When you see a question on the display about the type of media you
want to use, select
the setting and press
8. Print your page. After it is finished, the sheet stays in the printer.
9. To remove your print, press the d button or release the paper lever
while holding the printed sheet.
2-64
if the media is correct, or select
Yes
.
, then change
No