Advertisement
•
If possible, keep the packaging until the end of the guarantee period.
•
Danger!
The device and packaging material are no toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of swallowing or suffocating!
•
Pieces:
◦ Legs 4× (16)
◦ Long crossbar 2× (17)
◦ Short middle bar 2× (18)
◦ Short support 2× (21b)
◦ Long support 2× (21a)
◦ Traverse 4× (fig. 5, 21c)
◦ Support frame 2× (16b)
◦ Table width extension 2× (8)
◦ Rubber feet 4× (16a)
◦ Parallel stop (15)
◦ Saw blade guard (4)
◦ Cross stop (7)
◦ Extractor adapter (5)
◦ Push stick (9)
◦ Ring wrench 10/21 mm (22a)
◦ Ring wrench 10/13 mm (22b)
◦ Hexagonal screw 36× (19)
◦ Hexagonal screw nut 28× (20)
◦ Riving knife
Proper use
The bench-type circular saw is designed for the slitting and cross-cutting (only with the cross stop) of all
types of timber commensurate with the machine size. The device is not to be used for cutting any type
of round wood.
The device is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any
kind caused as a result of this.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61950
Page 9
05
2021-1
Advertisement
