Advertisement
Quick Links
Operation Manual
Mini Saw
62554
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 62554
Summary of Contents for WilTec 62554
- Page 1 Operation Manual Mini Saw 62554 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Guide rail 14 Tiltable protective cover Handle 15 TCT circular saw blade (universal) Washer 16 Diamond saw blade for stone/tiles On/off switch 17 Hexagon socket wrench Nameplate © by WilTec Wildanger Technik GmbH Item 62554 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 © by WilTec Wildanger Technik GmbH Item 62554 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 If use in a damp environment cannot be prevented, use a protected power supply with an FI circuit breaker. The use of a residual current circuit breaker reduces the risk of electric shock. © by WilTec Wildanger Technik GmbH Item 62554 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 into it. Adjust the cutting depth to the thickness of the workpiece. No more than one tooth of the saw blade should emerge below the workpiece. © by WilTec Wildanger Technik GmbH Item 62554 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 Check the function and condition of the return spring of the protective device. If the guard and spring are not working properly, they must be serviced before use. The protective device could © by WilTec Wildanger Technik GmbH Item 62554 Page 7 http://www.WilTec.de...
- Page 8 Too much dust build-up can cause the fan to clog and create electrical hazards. Do not use accessories that require liquid coolant. Using water or other liquid coolants could result in electric shock. © by WilTec Wildanger Technik GmbH Item 62554 Page 8 http://www.WilTec.de http://www.aoyue.eu...
- Page 9 7. Press the spindle lock button (10) until it clicks, and firmly tighten the clamping screw. Note: The arrow on the saw blade must point in the same direction as the arrow on the device showing the direction of rotation. © by WilTec Wildanger Technik GmbH Item 62554 Page 9 http://www.WilTec.de http://www.aoyue.eu...
- Page 10 (excess material) if ◦ you do not want to damage the work surface; ◦ the work surface can damage the saw blade, e. g. on a concrete floor. © by WilTec Wildanger Technik GmbH Item 62554 Page 10 http://www.WilTec.de http://www.aoyue.eu...
- Page 11 Always use a suitable vacuum cleaner or a connected dust extraction system, as the dust can be dangerous for the operator and prevents the protective device from properly working. © by WilTec Wildanger Technik GmbH Item 62554 Page 11 http://www.WilTec.de...
- Page 12 Sound power level L (dB (A)) 85 dB (A). Incertitude value K (dB (A)) The noise emission values have been measured according to the relevant standard. © by WilTec Wildanger Technik GmbH Item 62554 Page 12 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 13 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.