Advertisement
•
Clean the device regularly with a moist cloth and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of the device. Ensure that no water can seep
into the device. The ingress of water into an electric tool increases the risk of an electric shock.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.
Maintenance
There are no parts inside the device which require additional maintenance.
Ordering replacement parts
Please quote the following data when ordering replacement parts:
•
type of machine,
•
article number of the machine,
•
identification number of the machine,
•
replacement part number of the part required.
Storage
Store the device and accessories in a dark and dry place at above freezing temperature. The ideal
storage temperature is between 5 ℃ and 30 ℃. Store the electric tool in its original packaging.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Danger!
The carbon brushes should not be replaced
by anyone but a qualified electrician.
Item 61950
Page 16
05
2021-1
Advertisement
