Download Print this page

WilTec 61950 Operation Manual page 3

Bench-type circular saw
Hide thumbs Also See for 61950:

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Warning!
Wear earmuffs. Noise can permanently damage your hearing.
Warning!
Wear a respirator mask. While working with wood or other materials, dust harmful to your
lungs can accumulate. Never use the device on materials that contain asbestos.
Warning!
Always wear protective glasses. Sparks, splinters, or dust generated during use can lead
to blindness.
Warning!
Risk of injury. Never reach into the moving saw blade.
Danger!
When using the device, a few safety precautions must be observed to avoid injuries and damage. Please
read the complete operating instructions and safety regulations with due care. Keep this manual in a
safe place so that the information is available at all times. If you give the device any other person, hand
over these operating instructions and safety regulations, too. We cannot accept any liability for damage
or accidents which arise due to a failure to follow these instructions and the safety instructions.
Safety regulations
Warning!
Do read all safety regulations and instructions. Any errors made in following the safety
regulations and instructions may result in an electric shock, fire, and/or serious injury. Keep all safety
regulations and instructions in a safe place for future use.
Safe work
Keep the work area tidy. Work area disorder can lead to accidents.
Take environmental influences into account.
◦ Do not expose electric tools to rain.
◦ Do not use electric tools in a damp or wet environment.
◦ Make sure that the work area is well-illuminated.
◦ Do not use electric tools where there is a risk of fire or explosion.
Protect yourself from electric shock. Avoid physical contact with earthed parts (e. g., pipes,
radiators, electric ranges, cooling units).
Keep children away. Do not allow other persons to touch the device or the cable. Keep them
away from your work ares.
Securely store unused electric tools. Unused electric tools should be stored in a dry, elevated
or closed location out of the reach of children.
Do not overload your electric tool. They work better and more safely in the specified output
range.
Use the correct electric tool.
◦ Do not use low-output electric tools for heavy work.
◦ Do not use the electric tool for purposes for which it is not intended. For example, do not
use hand-held circular saws for the cutting of branches or logs.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61950
Page 3
05
2021-1

Advertisement

loading