Advertisement
Quick Links
Operation Manual
Mobile Metal Band Saw
61917
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61917
Summary of Contents for WilTec 61917
- Page 1 Operation Manual Mobile Metal Band Saw 61917 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 It is strictly forbidden to modify safety equipment or devices of the machine. Resulting waste throughout the working process must be disposed in compliance to current regulations. © by WilTec Wildanger Technik GmbH Item 61917 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 The description specifies the use for which this product has been designed and built. Any other use or failure to comply with the technical parameters listed below may lead to hazardous situ- ation including the risk of injury to people and property. © by WilTec Wildanger Technik GmbH Item 61917 Page 4 http://www.WilTec.de...
- Page 5 Max. cutting depth (mm) round 100 (with 90°), 55 (with 45°) Cutting capacity (mm) square 100 × 105 (with 90°), 55 × 60 (with 45°) Weight (kg) © by WilTec Wildanger Technik GmbH Item 61917 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 8. Slide the rod (23) to determine the desired cutting length. 9. Tighten the knob (22) securely. 10. Set the cutting speed using the regulator (9); set the blade advancement based on the mater- ial to be cut. © by WilTec Wildanger Technik GmbH Item 61917 Page 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 Failure to observe the safety rules indicated in this manual as well as changes or any modification to the machine (however slight) will invalidate all warranty coverage. © by WilTec Wildanger Technik GmbH Item 61917 Page 7 http://www.WilTec.de...
- Page 8 Check the length of the electric motor brushes and make sure they are efficient. If they are less than 6 mm long, they must be replaced with original new ones. The gear transmission requires no maintenance since it runs on long life lubricants. © by WilTec Wildanger Technik GmbH Item 61917 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 9 Images © by WilTec Wildanger Technik GmbH Item 61917 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 10 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.