Advertisement
Quick Links
Operation Manual
Mobile Metal Band Saw
61917
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61917
Summary of Contents for WilTec 61917
- Page 1 Operation Manual Mobile Metal Band Saw 61917 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 It is strictly forbidden to modify safety equipment or devices of the machine. • Resulting waste throughout the working process must be disposed of in compliance to current regulations. © by WilTec Wildanger Technik GmbH Item 61917 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 The description specifies the use for which this product has been designed and built. Any other use or failure to comply with the technical parameters listed below may lead to hazardous situation including the risk of injury to people and property. © by WilTec Wildanger Technik GmbH Item 61917 Page 4 http://www.WilTec.de...
- Page 5 The saw may be lifted, carried and moved by hand in compliance with the instructions below: • Fasten the blade arm in its end position using the mechanical lock provided (Fig. 2, ref. 2). © by WilTec Wildanger Technik GmbH Item 61917 Page 5 http://www.WilTec.de...
- Page 6 Operator position • The placement of the machine in relation to the operator position must allow observing the re- sults of the operation to maintain safety. © by WilTec Wildanger Technik GmbH Item 61917 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 During the first 4–6 cuts (after replacing the blade), only perform slight cutting pressures to in- crease the duration and effectiveness of the blade thereafter. After each working shift Carefully clean all parts of the machine to remove shavings and cutting residue. © by WilTec Wildanger Technik GmbH Item 61917 Page 7 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 6 mm long, they must be replaced with original new ones. • The gear transmission requires no maintenance since it runs on long life lubricants. Figures and illustrations © by WilTec Wildanger Technik GmbH Item 61917 Page 8 http://www.WilTec.de http://www.aoyue.eu...
- Page 9 © by WilTec Wildanger Technik GmbH Item 61917 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 10 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...