Table of Contents
Advertisement
Quick Links
Operation Manual
Portable Band Saw
62850
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Related Manuals for WilTec 62850
Summary of Contents for WilTec 62850
- Page 1 Operation Manual Portable Band Saw 62850 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: Safety Instructions
Damaged or worn cables must not be repaired and have to instead be replaced by a qualified electrician. © by WilTec Wildanger Technik GmbH Article 62850 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 4 Always store the device in a dry and safe place inaccessible to children and unauthorised indi - viduals. © by WilTec Wildanger Technik GmbH Article 62850 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 Have your power tool serviced by qualified personnel and make sure that only identical parts of equal quality are used as spare parts. This will ensure that the safety of the power tool is maintained. © by WilTec Wildanger Technik GmbH Article 62850 Page 5 http://www.WilTec.de...
- Page 6 Children are not allowed to operate the tool and should be super- vised at all times in order to ensure that they do not play with it. © by WilTec Wildanger Technik GmbH Article 62850 Page 6 http://www.WilTec.de...
-
Page 7: Getting Started
Always make sure to let the moving parts of the tool come to a complete halt before placing it any- where. Never attempt to forcefully stop the rotation of the accessory. © by WilTec Wildanger Technik GmbH Article 62850 Page 7 http://www.WilTec.de... - Page 8 Turn on/off the Portable Band Saw by switch "F" electronic speed control. Adjust the speed by turning the speed dial "E". The speed can be adjusted in order to cut different materials. © by WilTec Wildanger Technik GmbH Article 62850 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 9: Cutting Operations
Do not attempt to clean ventilation slots by inserting pointed objects through openings. Technical Specification Voltage 220-240V / 50Hz Power 1100W Saw blade speed 0-2,4 m/s Cutting capacity 127 x 127 nn Protection class © by WilTec Wildanger Technik GmbH Article 62850 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 10 Tension handle External carbon brush Auxiliary handle Motor housing Speed dial On/Off switch Guide bar Blade Screw Guide bearing LED power switch LED light © by WilTec Wildanger Technik GmbH Article 62850 Page 10 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 11: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.