Advertisement
Quick Links
Operation Manual
Reciprocating Saw
61076
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61076
Summary of Contents for WilTec 61076
- Page 1 Operation Manual Reciprocating Saw 61076 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • emissions of harmful saw dust. If the instructions contained in this operating manual are not followed, other risks can occur due to improper operation. © by WilTec Wildanger Technik GmbH Item 61076 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 Comply to potentially existing hours of quietness and limit the work duration to the maximum requirements. For personal safety and safety of people in close proximity, a suitable hear- ing protection needs to be worn. © by WilTec Wildanger Technik GmbH Item 61076 Page 4 http://www.WilTec.de...
- Page 5 When working with an electric tool outside, only use extension cables suitable for the outside area. The use of an extension cable suitable for the outside area reduces the risk of electric shock. © by WilTec Wildanger Technik GmbH Item 61076 Page 5 http://www.WilTec.de...
- Page 6 Hold the isolated handles of the device, when carrying out work, during which the tool can hit hidden electricity lines or the own electricity cable. Contact with a live wire can put metal device parts under voltage and can lead to electric shock. © by WilTec Wildanger Technik GmbH Item 61076 Page 6 http://www.WilTec.de...
- Page 7 = increase speed = decrease speed The more the button is turned, the higher the rotation speed. The speed can be adjusted stepless, to the required speed. © by WilTec Wildanger Technik GmbH Item 61076 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 8 Push the saw blade guard firmly against the surface and turn the saw blade upward carefully. The saw blade will work through the material. Ensure, that the material is properly separated, before sawing the remaining pocket. © by WilTec Wildanger Technik GmbH Item 61076 Page 8 http://www.WilTec.de...
- Page 9 Switch the device off and remove the electricity plug if the connection cable is damaged. If the power cord of this device has been damaged, it needs to be replaced with a special power cord by a qualified technician. © by WilTec Wildanger Technik GmbH Item 61076 Page 9 http://www.WilTec.de...
- Page 10 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...