Usb; Reminder When Using The Usb Player - Strong SRT 32HA4003N User Manual

Restore Factory Default
Version Information
HDMI CEC
Home /Shop
USB Clone
5.7.1 HDMI CEC
CEC Control
Audio Receiver
Device Auto Power Off
TV Auto Power On
Device List
Device Menu

6.0 USB

6.1 Reminder when using the USB player

1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected
accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data
backup is consumer's responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB
mode otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only)
file system provided with the Windows operating system. In case of a storage device formatted
as a different utility programme which is not supported by Windows, it may not be recognized.
7. When using a USB Hard Disk Drive which is not powered independently, ensure its power does
not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull
out the USB Hard Disk and restart the TV system.
8. An "Unsupported File" message will be displayed if the file format is unsupported or the file is
corrupted.
9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
10. This TV may not support some multimedia files changed and upgraded as the change of the
encoding format or other technical aspects advances.
11. Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.
Press pq to select this function, by pressing OK and enter the PIN code. You
will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation. See chapter 3.
Your current software version is displayed.
See chapter 5.7.1.
Switch between Home modes and Shop modes with default more brightness
and Auto standby to off.
This option allow you to copy you channel list to USB device as back up. Insert
USB device and select Back up. To load this later back into TV, select "Restore".
Press t u to turn the HDMI CEC On or Off.
Press t u to turn the Audio Receiver On or Off.
Press t u to turn on this feature. When finished turn off your TV. The
connected device will turn off automatically.
Press t u to select this option. When finished, turn on the connected device.
The TV will switch on automatically.
Press OK to open the main menu of device.
Access the device menu.
13