Table of Contents
Advertisement
Advanced Menu & Quick Launch
The Advanced Menu is to set-up and configure the Firecom Connect for use. Caution
must be taken with these adjustments, as they change the operational characteristics
of the Firecom Connect.
To Enter the Advanced Menu
While the Firecom Connect is ON, simultaneously press and hold the plus
minus
and Power
buttons until you hear
–
To Adjust Advanced Menu settings
1. Enter the Advanced Menu.
2. Press either the plus
or minus
3. Once you hear the menu setting item you want to change, press the PTT
button to select the menu item
4. Again, press either the
and press the PTT
button to confirm your selection. You will hear a
voice prompt.
5. Press the Power
button to go back to change a different setting or keep
pressing the Power
button to exit the Advanced Menu. You will hear a
"Exiting Advanced Menu"
voice prompt.
To Exit the Advanced Menu
Press the Power
button until you hear the
or wait 15 seconds to automatically exit.
Advanced Menu Structure & Settings
•
Version
•
Radio / Intercom Modes
•
Mic Noise Reduction (Noise Gate)
•
Bluetooth Mic Gain
•
Corded Mic Gain
•
Corded Side Tone
•
DECT Radio RSSI Reporting
•
DECT Audio
•
DECT Registration
•
DECT Multi-Base Station
"Advanced Menu"
to cycle through the menu setting options.
–
or minus
–
button to cycle through the settings
"Exiting Advanced Menu"
Version (
"Version 1"
Indicates what firmware version your Firecom Connect is running.
From this menu item users can enter "Factory Options" settings, which allows for
the following:
and
voice prompt.
"Default Settings"
•
settings (DECT and Bluetooth pairings remain).
•
"Factory Reset"
Bluetooth pairings, and resets to default settings.
Radio / Intercom Modes
Sets the function of the PTT and Intercom.
"Set"
Radio Transmit: For Radio PTT, when the Firecom Connect has a DECT connection,
and a two-radio interfaced into the ComHub or intercom, the PTT may activate the
DECT Radio wireless connection.
Intercom: This configures how the PTT and Mic Noise Reduction (Noise Gate) interact
with each other while a person is talking with their local wireless team. If you can
hear yourself through the side tone, others can hear you.
voice prompt
Factory Setting
"Radio
VOX":
Radio Transmit
on PTT ,
Hands Free
Intercom
Mic Noise Reduction (Noise Gate)
Factory Default: "Auto"
The Mic Noise Reduction may be configured into multiple modes of operation to
tailor to the user's application. This setting allows adjustment of the mic attenuation.
Higher numbers reflect a more aggressive noise gate, which makes background noise
harder to be heard. The "Auto" setting works continuously to automatically select
the optimum setting for the user based on the audio level received from the mic.
However, the user can choose a "Fixed" setting (from 1 minimum to 9 maximum) if
they choose. Also, "Off" can be selected, resulting in no noise gate.
7 |
P a g e
)
– when selected Firecom Connect is reset to default
- when selected Firecom Connect clears all DECT pairings,
Options:
•
"Radio
VOX": Radio Transmit on PTT , Hands Free Intercom
•
"Radio
PTT": Radio Transmit on PTT , Push to Talk Intercom
•
"Intercom
VOX": Hands Free Intercom only
•
"Intercom
PTT":
Push to Talk Intercom only
•
"Intercom
Toggle":
Toggle to Talk Intercom only
Advertisement
Table of Contents
