Led Indications; Settings & Operation; Buttons - Firecom CONNECT Manual

LED Indications

The Firecom Connect uses multicolor LED indicators to give additional information on
the exterior of the device. The table below describes the behavior while charging or
in use.
LED Status
DECT Pairing/reconnecting
DECT Paired
Bluetooth Pairing/reconnecting
Bluetooth Paired
Mic Device Mute ON
Radio transmit or Intercom
Mic
On/Toggle transmit
Lights (blinking/solid)
     
     
     
5 |
Settings & Operation

Buttons

Turn On
Apply a 1 second short Power
Turn Off
Apply a 1 second short Power
Adjusting the Main Volume
Press the plus or minus
–

Beeps indicate the increase or decrease in the desired volume adjustments. Firecom
Connect has up to nine volume level settings (Default level: 70% of max volume).
Adjustments to the volume can also be made on the device paired or plugged into
the Firecom Connect.
Device Mute
This feature blocks all outbound communication from your device.
With Firecom Connect power ON and your headset plugged in or paired via Bluetooth
1. Press and hold the minus
P a g e
Button press to turn ON the device.
Button press to turn OFF the device.
buttons on the side of the Firecom Connect.
– for a 2 second long button press.