Quick Launch Menu Options - Firecom CONNECT Manual

Notes:
• When using Bluetooth ear buds, a setting of 2 or lower is recommended.
• When the user presses the Radio PTT, any noise gate will be removed when in
Radio VOX & Radio PTT modes.
Bluetooth Mic Gain
Factory Default: "4"
Allows adjustment of the mic amplitude for your Bluetooth device. If Bluetooth
device controls separately will use those settings. Normally, adjustment is not
needed.
Available Settings: 0 – 15 (0 is minimum, 15 is maximum)
Corded Mic Gain
Factory Default: "6"
Allows adjustment of the mic amplitude of your corded device. Normally, adjustment
is not needed.
Available Settings: Minimum, 1 – 7, Maximum
Corded Side Tone
Factory Default: "ON"
Side Tone is the ability to hear yourself talking, if you can hear yourself then others
on the system can hear you too.
Available Settings: ON / OFF
DECT Radio RSSI Reporting
Factory Default Setting: "OFF"
Enabling this setting allows the Firecom Connect to read out RSSI (Received Signal
Strength Indicator) numbers that tell you how strong the Firecom Connection to the
Base Station or ComHub are. This can be used to improve system installations.
To use signal strength reporting:
1. Make sure your Firecom Connect has a DECT wireless connection.
2. Enter the Advanced Menu.
3. Use the plus or minus buttons to scroll through settings until you hear
–

RSSI Reporting".
4. Press the PTT button to enter the available settings

5. Use the plus or minus – buttons to change the setting to

6. Press the PTT
voice prompt.
7. If the Firecom Connect has a DECT connection and the Radio RSSI Reporting is set
to ON, it will announce the signal strength every 5 seconds. If no DECT connection
is present, the Firecom Connect will announce
To exit, press the Power
heard.
DECT Audio
Factory Setting
"DECT
DECT Registration
Factory Default: "ON"
Allows device to be DECT paired to other base stations. Can be set to "OFF" to
prevent accidental unpairing during normal use.
DECT Multi-Base Station
Factory Default: "OFF"
Allows users to pair their Firecom Connect to multiple Base Stations at once so
users can switch to a different Base Station without having to perform the DECT
pairing function each time.
"Radio

Quick Launch Menu Options

Quick Launch allows for users to access some features quickly without having to go
"ON" or "OFF".
into the Advanced Menu to make adjustments after they are enabled from the
Advanced Menu the first time. (For example, Channel selection and Multi Base
8 | P a g e
button to confirm your desired setting. You will hear the

button until "Existing Advanced Menu"
Options:
"DECT Wide" – Better sound quality.
•
Wide"
• "DECT Narrow" – Better resistance to interference.
"Set"
"No DECT" once.
voice prompt is