Advertisement
Quick Links
Advertisement
Related Manuals for Firecom CONNECT
Summary of Contents for Firecom CONNECT
- Page 1 FIRECOM CONNECT Quick Start Guide...
- Page 2 BASIC FEATURES — CONTROLS 3.5mm Headset Jack Power Button Volume Up Push-to-Talk Volume Down (device mute) USB Port (not shown)
- Page 3 STATUS LED FUNCTIONALITY Battery level and connection status are indicated by the LEDs as shown below: DECT Bluetooth Mic (transmit) Power 25% to 5% battery 100% to 50% battery (flashing) 5% or less battery 50% to 25% battery Connection Status When powered on, the LEDs indicate the following connection status: Status Lights (blinking/solid)
- Page 4 Blue. 5. Pairing successful when Bluetooth LED is solid Blue. BLUETOOTH USE Use + or - on the Firecom Connect or your Bluetooth device to adjust volume. Bluetooth pairing time out is 40 seconds on the Firecom Connect.
- Page 5 For first use: 1. Place Base Station into pairing mode (see Base Station manual for details). 2. With the Firecom Connect powered on, simultaneously push and hold the PWR and PTT buttons for 2 seconds, then release. The DECT LED light will blink green while pairing.
- Page 6 CHARGING Use supplied USB-C charging cable and AC wall adapter.
- Page 7 WEAR OR MOUNT YOUR FIRECOM CONNECT WARNINGS: Magnets can pinch and break bones. Use extreme caution when handling magnets to avoid magnets snapping or slamming together. Do not put hands, fingers or any other body parts between magnets. Use caution to keep magnets at a safe distance from metals, steel and other magnets to avoid instant impact, splintering or breakage.
- Page 8 800-527-0555 17600 SW 65th Ave Lake Oswego, OR 97035 USA © Firecom Corporation. All Rights Reserved. The information in this document is subject to change without notice. No part of this document may be copied or reproduced in any form without the prior written consent of Sonetics Corporation.