Pick Your Headset (Or Bluetooth Speaker); Wear Or Mount Your Firecom Connect - Firecom CONNECT Manual

headsets to be connected to a Wireless Base Station simultaneously. Pressing the
Radio PTT button allows the Firecom Connect or headset to momentarily talk on any
available slot. A tone will let the user know when they can talk. After talking, there
will be a slight delay when other users cannot be heard. Refer to the Wireless Base
Station manual for details.
Radio PTT or Intercom Only Selection
The Firecom Connect may be configured to send a transmit signal to radios connected
via a DECT7 Wireless Base Station or Intercom. The user can transmit over multiple
radios depending on the configuration.
Multi-Channel System
Depending on the wireless DECT7 Wireless Base Station the user may have access to
multiple channels. This allows large teams to have separate channels for different
activities and enables users to change channels and become one communication
team. Refer to the Wireless Base Station manual for configuration details.
Out of Range Warning
The user is notified when DECT7 signal is weak by a voice prompt saying "DECT Radio
Level Low." If the Firecom Connect goes out of range a voice prompt saying "Base
Station Disconnected" will be heard. Once the Firecom Connect reestablishes the
DECT7 pairing a voice prompt confirming this will say "Base Station Connected.
Proximity Pairing
To enhance security, the Wireless Base Station will only pair to wireless DECT7 units
in close proximity. This adds another layer of protection for users.
Signal Strength Reporting
The Firecom Connect may be placed into a field diagnostic mode to detect signal
strength at the Firecom Connect. This can be used to optimize placement of ComHubs
or Base Stations.
Wide Band Audio
Wireless DECT7 communications are transmitted in a high-definition wide band audio
format. This gives better sound quality, greater intelligibility, and improves with voice
activated control systems. The Firecom Connect can also be used in narrow band if
necessary.
Configuring the Firecom Connect
The Firecom Connect can be used in a variety of ways including being placed on a
dashboard or desk, worn on your belt with the included magnetic belt clip, clipped to
your clothing with the round magnetic clasp or simply dropped into your pocket.
Already have a magnetic mount? You can use those too. Users even have many
options of what type of device they choose to use with their Firecom Connect like
Bluetooth headsets, Bluetooth ear buds, Bluetooth speakers/conference call
speakers or a 3.5mm wired headset.

Pick Your Headset (or Bluetooth Speaker)

Wear or Mount Your Firecom Connect

3 | P a g e