Programmable Re-Sets; Alarm Receiving Centre Telephone Number; Alarm Receiving Centre Second Telephone Number; Downloading Access Code - Pyronix ATLAS 8 PLUS Installation Manual

12.11.6 System Option 4
Enter followed by
Display
Anti code reset enabled
X
Anti code reset
disabled
Enter to confirm programming.

12.11.7 Programmable Re-sets

Enter followed by the number of re-sets required

12.11.8 Alarm receiving centre Telephone Number

Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.

12.11.9 Alarm receiving centre Second Telephone Number

Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
12.11.10 Customer Account Code 1(Issued by Alarm receiving centre)
Enter followed by the 4 digit code.
To use hex codes, use the up key to select the character required and the

12.11.11 Downloading Access Code

Enter followed by the 4 digit code.

12.11.12 Zone Alarm reporting Codes

Enter followed by 2 digits for each alarm zone. To disable an event insert blanks in place of the two digits.
To use hex codes, use the up key to select the character required and the
For example to program alarm zone reporting codes 68 69 and 71 to zones 2, 4 and 7 respectively the following would be
entered:
Zone 1 Zone 2
Reporting codes are automatically stored after the 16th key press or by pressing the
Rins163 Issue 9
- . The RKP will toggle
1
Open Zones Displayed
Open Zones Disabled
,
a " " is displayed to cause a 2 second pause during dial out.
,
a " " is displayed to cause a 2 second pause during dial out.
Example
Alarm zone 1
Alarm zone 2
Alarm zone 3
Alarm zone 4
Alarm zone 5
Alarm zone 6
Alarm zone 7
Alarm zone 8
Zone 3 Zone 4 Zone 5
X
and as the numbered keys are pressed.
Key Press
2
Alarm on line fail -
STU
No alarm on line fail -
STU
to
Zone 6 Zone 7
3
Alarm on line fail - PC
No alarm on line fail -
PC
( = continuous re-setting)
key to accept.
key to accept.
key.
4
Page 51