Programmable Re-Sets; Central Monitoring Station Telephone Number; Second Telephone Number; Customer Account Code - Pyronix BUMBT!8 Installation Instructions Manual

11.11.7 Programmable Re-sets

Enter followed by a single digit

11.11.8 Central Monitoring Station Telephone Number

Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.11.9 Central Monitoring Station Second Telephone Number
Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.11.10 Customer Account Code (Issued by Central Monitoring Station)
Enter followed by the 4 digit code.
e.g. 4 digit 1,2,3,4.

11.11.11 Downloading Access Code

Enter followed by the 4 digit code.

11.11.12 Zone Alarm reporting Codes

Enter followed by 2 digits for each alarm zone. To disable an event insert blanks in place of the two digits.
To use HEX codes, use the
For example to program alarm zone reporting codes 68 69 and 71 to zones 2, 4 and 7 respectively the following would be
entered:
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7
Reporting codes are automatically stored after the 16th key press.
Rins 181 Issue7
a " " is displayed to cause a 2 second pause during dial out.
a " " is displayed to cause a 2 second pause during dial out.
key to select the character required and the
Example
Alarm zone 1
Alarm zone 2
Alarm zone 3
Alarm zone 4
Alarm zone 5
Alarm zone 6
Alarm zone 7
Alarm zone 8
- ( = continuous re-setting)
key to accept.
Page 23