Alarm Receiving Centre Second Telephone Number; Downloading Access Code; Zone Alarm Reporting Codes - Pyronix ATLAS 8 PLUS Installation Manual

Enter followed by the number of re-sets required
11.11.8 Alarm Receiving Centre Telephone Number
Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.

11.11.9 Alarm Receiving Centre Second Telephone Number

Enter followed by the telephone number. (Up to 16 digits)
By pressing the
Press to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.11.10 Customer Account Code (Issued by Central Monitoring Station)
Enter followed by the 4 digit code.
To use hex codes, use the up key to select the character required and the

11.11.11 Downloading Access Code

Enter followed by the 4 digit code.

11.11.12 Zone Alarm reporting Codes

Enter followed by 2 digits for each alarm zone. To disable an event insert blanks in place of the two digits.
To use hex codes, use the up key to select the character required and the
For example to program alarm zone reporting codes 68 69 and 71 to zones 2, 4 and 7 respectively the following would be
entered:
Zone 1 Zone 2
Reporting codes are automatically stored after the 16th key press or
Rins163 Issue 9
a " " is displayed to cause a 2 second pause during dial out.
a " " is displayed to cause a 2 second pause during dial out.
Example
Alarm zone 1
Alarm zone 2
Alarm zone 3
Alarm zone 4
Alarm zone 5
Alarm zone 6
Alarm zone 7
Alarm zone 8
Zone 3 Zone 4 Zone 5
to ( = continuous re-setting)
key to accept.
key to accept.
Zone 6 Zone 7
key to accept.
Page 35